YE-292B湿热定型机 Steam Forming Machine   适用于鞋绷帮结束后，利用高温蒸汽及干燥之热气高效率软化帮面，继而用强风拂化帮面，以达到快速定型效果。 采用喷射式风管设计，特制不锈钢加温室，使热风和蒸气高速对流，以消除帮面内应力，达到去皱与干燥定型之目的，使帮面更贴楦，彻底改变了传统热定型用加热管直接对帮面进行不科学的烘烤的工艺，从而避免了帮面因烘烤面而损坏原有皮质柔韧性与光泽的弊端。 加温室采用内循环结构，有利于加快帮面定型速度，亦可节约电能和鞋楦。 本机以无级调速马达驱动, 速度准确可调，整机运作安全、可靠。 配有直观的数显温度控制器，可依鞋材调至最佳使用温度。 配有蒸汽时间调节控制器，可随时调整蒸汽量。  备注：YE-292A为3.2米四通道机型                YE-292B为4.2米四通道机型 YE-292C为4.2米六通道机型   Duct with jet design, special stainless steelheating chamber. High-speed convection hot air and steam, the upper morestickers last, completely changed the traditional process, maintainingflexibility and gloss leather. Heating chamber with inner loop structure, speed upthe upper surface of forming speed, saving energy and shoe last. Equipped with temperature controller, adjustaccording to shoes material and get best effect, also with steam controller,can adjust steam power anytime. Timer controls speed. YE-292A   3.2 meters four channels Model YE-292B    4.2 meters four channels Model YE-292C   4.2 meters Six channels Model Model Dimensions Weight Voltage Power Capacity 3240X950X1620mm 12kw YE-292B 600kg380V 2000Pairs/8H 4200X1265X1600mm 25kw