远益鞋机 中禧机械有限公司 http://cneaga.com 远益鞋机,广东鞋机十强企业,是一家集开发,制造和销售为一体的专业制鞋机械设备企业。专业生产后踵定型机,量产更实惠!高品质智能中底设备。 Sat, 26 Sep 2020 22:46:27 +0800 zh-CN hourly 1 https://www.s-cms.cn/?v=4.7.5 关于远益 Sat, 26 Sep 2020 22:46:27 +0800      | 远益鞋机始创于1996年,座落在信息网络发达的广东省佛山市,是专业于制鞋整厂设备的输出,并集研发、OEM制造、销售服务的综合型制鞋机械企业。 
     |多年来,我们始终秉承“优良品质”的经营原则,以“专业、诚信、创新、服务”为宗旨,以追求成为鞋机行业最具竞争实力的企业为目标,坚持“专业制造 用心服务”的理念,致力于制鞋机械事业的发展。今天,我们已从最初的创业者发展成为同行业佼佼者,并获“广东鞋机十强” 企业殊荣。 
     |“以人为本”的人性化管理模式,吸引了大批的优秀人才加盟,打造了一个团结协作、业务精干、技术过硬的学习型团队。我们一直努力学习国内外先进的制鞋机械技术,融合自身优势,不断创新突破,提高自身的研发能力,紧跟世界鞋机发展潮流,引进意大利、德国、台湾等先进的生产设备,专业为客户提供制鞋整厂的“统一规划、统一销售、统一服务”的一站式创新模式,让客户在售前、售中、售后服务中感受到方便与快捷。 
     | 我们真诚希望在今后的岁月中继续与广大的用户和社会各界真诚合作,携手前进,共同发展! 


     |佛山市南海中禧机械有限公司 远益鞋机

]]>
YE-738 油压自动前帮机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-738
油压自动前帮机
Hydraulic Toe Lasting Machine

 

1.     每双爪子均可配合鞋型,独立调整相对位置及自动平衡功能,并可视鞋面松紧度,选择左右独立自动下拉之行程动作。

2.     九爪独立式可个别调整配合任何形状之鞋头结帮,其自动平衡及扫刀前进时自动下降的原理,更是提高品质增加产量的特征。

3.     扫刀具有寸动及调速功能,使结帮控制的调整作业更为方便。

4.     本机附有十字投影灯装置,方便鞋头校正作业,同时使新手更容易操作。

5.     爪子为快速拆装结构,可于30秒内换装完成。

6.     内撑台上升高度,由外部遥控调整,并提供数字指示参考,使操作更方便。

7.     各机构之压力与速度均可由外部调整,压力表亦配置在机台外部,使机械操作与调整更方便。

8.     最新设计之内外撑台前后调整机构,可针对各鞋型之大小号,快速调整撑台和中爪之相对位置。

9.     第五爪结构于扫刀结帮时爪嘴向内旋转。旋转角度可调整,使前中帮衔接转角处之鞋面能向内拉紧更贴揎,再配合辅助扫刀做结帮动作,使鞋头的结帮品质达到完美境界。

10.  爪盘大小快速调整结构爪盘采用双轨迹结构,左右分开独立位移调整。其旋转原点则不受空间限制,设定于中爪及第二爪之衔接处,故左右爪组于快速调整大小时,和中爪之弧型位置,绝不会改变,可使鞋面于夹紧时更贴楦头,确保结帮质量。

 

1.     Each set of pincers can be individually adjusted totheir corresponding positions and be functioned with automatic balancing.Besides, an automatic down pulling stroke can be selected and controlledaccording to the tension of uppers.

2.     The 9 independent pincers can be individuallyadjusted to cope with the lasting for any shape of shoe toes. The automaticbalance device and the theory of automatic descending on wipers' advancing arethe very key points for upgrading the quality and raising the productioncapacity.

3.     The wipers are functioned with inching movement armspeed adjustment, which makes the whole adjustment of lasting control moreconvenient.

4.     The machine is equipped with cross projector, whichis convenient for correcting toe lasting and helps new comers to easilyoperate.

5.     The rapid installing and releasing structure forpincers can finish the whole process within 30 seconds.

6.     The height of the last support plate is remotelycontrolled. There is a numerical instruction provided for reference which makesthe operation easier and more efficient.

7.     The pressure and speed for each mechanism areadjusted and the pressure gage makes the operation and adjustment moreconveniently.

8.     The newly designed forward-and-backward adjustingmechanism for last support plates can quickly adjust the corresponding positionof last support plates and mid pincers according to different shoes sizes.

9.     The fifth pincers can rotate inward when the wipersmove in and last the shoes. The rotary angle can be adjusted which will helpthe upper at ball point more stretched and attached to the last. Then, by theaid of supplemental wipers, the shoes will be lasted and finished perfectly.

10.  The pincers fixed plate adopts the double-trackingstructure. It is independently adjusted on the right and left. The rotary pointof pincers fixed plate is located at the joint between the first and secondpincers. The curve in between will not be changed when the groups of right andleft pincers are adjusted, which will make the uppers more attached to thelasts.

 

机械尺寸Dimensions  

重量Weight

电压Voltage

功率Power

压力Pressure

产量Capacity

1710X1000X1950mm

1300kg

380V

2.5KW

50kg/cm2

1500Pairs/8H


]]>
YE-727A 油压自动后帮机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-727A 油压自动后帮机 Hydraulic Heel Seat Lasting Machine

 

1.    本机适用于鞋楦高度在180mm以下之一般中底及软中底鞋之后帮结帮用。

2.    本机具有微调结帮高度之装置,调整容易,定位准确。

3.    扫刀及束紧器规格齐全,可适用于任何鞋型:束紧器采用链条式包覆,束紧效果 最佳。

4.    本机采用齿轮、链条及棘轮式设计,调整辅助撑台高度,快速确实。

5.    楦头撑台第二次上升压著设计配合扫刀加热装置,增进结帮效果使成品平坦不发角,提高鞋子品质。

6.    本机采用最新型设计一机三用,可外翻固特异外翻内包。

 

1.    This machine is suitable forlasting the shoes with normal and soft insoles which heel height is less than180mm.

2.    This machine is equipped withthe device of lasting height micro switch which makes the machine easilyadjusted and positioned accurately.

3.    We have full sizes of wipersand forming bands to fit any shape of shoes, the forming bands are wrapped bychain and can accordingly produce a good forming effect.

4.    This machine adopts gears,gear racks and ratchets to quickly and precisely adjust the auxiliarysupporter.

5.    The second time pressing ofthe last supporter works with the wiper heating device to improve lastingeffect to be smooth and improve shoes quality.

6.    The machine adopts latestdesign, with three purposes in one, can do Goodyear shoes and fold inside. 

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

压力Pressure

产量Capacity

1200X760X1420

580kg

380V

2.5KW

40kg/cm2

2500Pairs/8H

]]>
YE-737B 油压自动前帮机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>
YE-737B油压自动前帮机 Hydraulic Toe Lasting Machine

 

1.     每双爪子均可配合鞋型,独立调整相对位置及自动平衡功能,并可视鞋面松紧度,选择左右独立自动下拉之行程动作。

2.     七爪独立式可个别调整配合任何形状之鞋头结帮,其自动平衡及扫刀前进时自动下降的原理,更是提高品质增加产量的特征。

3.     扫刀具有寸动及调速功能,使结帮控制的调整作业更为方便。

4.     本机附有十字投影灯装置,方便鞋头校正作业,同时使新手更容易操作。

5.     爪子为快速拆装结构,可于30秒内换装完成。

6.     内撑台上升高度,由外部遥控调整,并提供数字指示参考,使操作更方便。

7.     各机构之压力与速度均可由外部调整,压力表亦配置在机台外部,使机械操作与调整更方便。

8.     最新设计之内外撑台前后调整机构,可针对各鞋型之大小号,快速调整撑台和中爪之相对位置。

9.     第五爪结构于扫刀结帮时爪嘴向内旋转。旋转角度可调整,使前中帮衔接转角处之鞋面能向内拉紧更贴揎,再配合辅助扫刀做结帮动作,使鞋头的结帮品质达到完美境界。

10.  爪盘大小快速调整结构爪盘采用双轨迹结构,左右分开独立位移调整。其旋转原点则不受空间限制,设定于中爪及第二爪之衔接处,故左右爪组于快速调整大小时,和中爪之弧型位置,绝不会改变,可使鞋面于夹紧时更贴楦头,确保结帮质量。

 

1.     Each set of pincers can be individually adjusted totheir corresponding positions and be functioned with automatic balancing.Besides, an automatic down pulling stroke can be selected and controlledaccording to the tension of uppers.

2.     The 7 independent pincers can be individuallyadjusted to cope with the lasting for any shape of shoe toes. The automaticbalance device and the theory of automatic descending on wipers' advancing arethe very key points for upgrading the quality and raising the productioncapacity.

3.     The wipers are functioned with inching movement armspeed adjustment, which makes the whole adjustment of lasting control moreconvenient.

4.     The machine is equipped with cross projector, whichis convenient for correcting toe lasting and helps new comers to easily operate.

5.     The rapid installing and releasing structure forpincers can finish the whole process within 30 seconds.

6.     The height of the last support plate is remotelycontrolled. There is a numerical instruction provided for reference which makesthe operation easier and more efficient.

7.     The pressure and speed for each mechanism areadjusted and the pressure gage makes the operation and adjustment moreconveniently.

8.     The newly designed forward-and-backward adjustingmechanism for last support plates can quickly adjust the corresponding positionof last support plates and mid pincers according to different shoes sizes.

9.     The fifth pincers can rotate inward when the wipersmove in and last the shoes. The rotary angle can be adjusted which will helpthe upper at ball point more stretched and attached to the last. Then, by theaid of supplemental wipers, the shoes will be lasted and finished perfectly.

10.  The pincers fixed plate adopts the double-trackingstructure. It is independently adjusted on the right and left. The rotary pointof pincers fixed plate is located at the joint between the first and secondpincers. The curve in between will not be changed when the groups of right andleft pincers are adjusted, which will make the uppers more attached to thelasts.

 

机械尺寸Dimensions  

重量Weight

电压Voltage

功率Power

压力Pressure

产量Capacity

1710X1000X1950mm

1300kg

380V

2.5KW

50kg/cm2

1500Pairs/8H


]]>
YE-737A油压自动前帮机(9爪) Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>
YE-737A油压自动前帮机 Hydraulic Toe Lasting Machine

 

1.    每双爪子均可配合鞋型,独立调整相对位置及自动平衡功能,并可视鞋面松紧度,选择左右独立自动下拉之行程动作。

2.    九爪独立式可个别调整配合任何形状之鞋头结帮,其自动平衡及扫刀前进时自动下降的原理,更是提高品质增加产量的特征。

3.    扫刀具有寸动及调速功能,使结帮控制的调整作业更为方便。

4.    本机附有十字投影灯装置,方便鞋头校正作业,同时使新手更容易操作。

5.    爪子为快速拆装结构,可于30秒内换装完成。

6.    内撑台上升高度,由外部遥控调整,并提供数字指示参考,使操作更方便。

7.    各机构之压力与速度均可由外部调整,压力表亦配置在机台外部,使机械操作与调整更方便。

8.    最新设计之内外撑台前后调整机构,可针对各鞋型之大小号,快速调整撑台和中爪之相对位置。

9.    第五爪结构于扫刀结帮时爪嘴向内旋转。旋转角度可调整,使前中帮衔接转角处之鞋面能向内拉紧更贴揎,再配合辅助扫刀做结帮动作,使鞋头的结帮品质达到完美境界。

10.  爪盘大小快速调整结构爪盘采用双轨迹结构,左右分开独立位移调整。其旋转原点则不受空间限制,设定于中爪及第二爪之衔接处,故左右爪组于快速调整大小时,和中爪之弧型位置,绝不会改变,可使鞋面于夹紧时更贴楦头,确保结帮质量。

 

1.    Each set of pincers can beindividually adjusted to their corresponding positions and be functioned withautomatic balancing. Besides, an automatic down pulling stroke can be selectedand controlled according to the tension of uppers.

2.    The 9 independent pincers canbe individually adjusted to cope with the lasting for any shape of shoe toes.The automatic balance device and the theory of automatic descending on wipers'advancing are the very key points for upgrading the quality and raising theproduction capacity.

3.    The wipers are functioned withinching movement arm speed adjustment, which makes the whole adjustment oflasting control more convenient.

4.    The machine is equipped withcross projector, which is convenient for correcting toe lasting and helps newcomers to easily operate.

5.    The rapid installing andreleasing structure for pincers can finish the whole process within 30 seconds.

6.    The height of the last supportplate is remotely controlled. There is a numerical instruction provided forreference which makes the operation easier and more efficient.

7.    The pressure and speed foreach mechanism are adjusted and the pressure gage makes the operation andadjustment more conveniently.

8.    The newly designedforward-and-backward adjusting mechanism for last support plates can quicklyadjust the corresponding position of last support plates and mid pincersaccording to different shoes sizes.

9.    The fifth pincers can rotateinward when the wipers move in and last the shoes. The rotary angle can beadjusted which will help the upper at ball point more stretched and attached tothe last. Then, by the aid of supplemental wipers, the shoes will be lasted andfinished perfectly.

10.  The pincers fixed plate adopts the double-trackingstructure. It is independently adjusted on the right and left. The rotary pointof pincers fixed plate is located at the joint between the first and secondpincers. The curve in between will not be changed when the groups of right andleft pincers are adjusted, which will make the uppers more attached to thelasts.

 

机械尺寸Dimensions  

重量Weight

电压Voltage

功率Power

压力Pressure

产量Capacity

1710X1000X1950mm

1300kg

380V

2.5KW

50kg/cm2

1500Pairs/8H

 


]]>
YE-101C 双桶式压底机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-101C 双桶式压底机 Barrel-type Sole Attaching Machine

 

  1. 本机广泛应用于男、女运动鞋、休闲鞋及其它平滑的橡胶大底鞋。
  2. 仿形全方位压合。
  3. 本机设有可调鞋子高度的功能,操作方式符合安全标准,避免产生意外。

 

  1. This machine is widely used in male and female sports shoes, casual shoes and other smooth rubber soled shoes.
  2. Profiling all-round lamination.
  3. This machine has a high degree of functionality, adjustable shoes mode of operation to meet safety standards, to avoid accidents.

 

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

890X570X1150mm

150kg

220V/50HZ

0.2kw

0.6MPa

1500Pairs/8H

]]>
YE-101B 双工位盖式压底机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-101B 双工位盖式压底机 Double Unit Cover-type Sole Attaching Machine

 

1.    本机广泛应用于男、女运动鞋、休闲鞋及其它平滑的橡胶大底鞋。

2.    仿形全方位压合。

3.    本机设有可调鞋子高度的功能,操作方式符合安全标准,避免产生意外。

 

1.    This machine is widely used in male and femalesports shoes, casual shoes and other smooth rubber soled shoes.

2.    Profiling all-round lamination.

3.    This machine has a high degree of functionality,adjustable shoes mode of operation to meet safety standards, to avoidaccidents.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

860X825X1050mm

285kg

220V/50HZ

0.2kw

0.6MPa

2500Pairs/8H

]]>
YE-101A 盖式压底机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-101A 盖式压底机 Cover-type Sole Attaching Machine

 

1.    本机广泛应用于男、女运动鞋、休闲鞋及其它平滑的橡胶大底鞋。

2.    仿形全方位压合。

3.    本机设有可调鞋子高度的功能,操作方式符合安全标准,避免产生意外。

 

1.    This machine is widely used in male and femalesports shoes, casual shoes and other smooth rubber soled shoes.

2.    Profiling all-round lamination.

3.    This machine has a high degree of functionality,adjustable shoes mode of operation to meet safety standards, to avoidaccidents.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

750X400X1050mm

150kg

220V/50HZ

0.2kw

0.6MPa

1200Pairs/8H

]]>
YE-908 油压全能压底机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-908 油压全能压底机 Multi-Purpose Sole Attaching Machine

 

1.    本机器适于各种男女鞋的大底胶粘合和鞋跟的压合,可根据鞋型、鞋种设定调整压着时间及压着大小,压着均匀效果好,一机两用。

2.    压底部份使用油压系统,压力足、效果好、不脱底。

3.    更改良了二次压底之功能,使鞋底在成型压底时,油压缸可配合鞋底高低不平的位置,自动伸展到其百分之百贴合位置,使鞋子的贴底更加紧密,不易产生间隙死角。

4.    压杆自动横移定位设计,使鞋子之取放方便无阻碍,能提高产能,且不使鞋面受损,故除一般鞋类外,无论长统或半长筒鞋,亦能方便的操作,且效果亦能踏实。

5.    作业时宁静无噪音,利于改善工作环境,提高工作效率。

 

1.    This machine is suitable forall kinds of soles attaching, high performance, and easy operation.

2.    Bar with hydraulic automaticbalance system, no need to adjust the pressure on average, crimping the best.

3.    Quiet noise-free operations,which will help improve the working environment, improve work efficiency.

4.     The toe lasting grade canbe adjusted.

5.     Any height  any sized of heel is allowed.

6.     Blank leather bag withthe shape of the last automatic change, both inside and outside the waistpressing evenly.

7.    Bar with hydraulic automaticbalance system, no need to adjust the pressure on average, crimping the best.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

压力Pressure

产量Capacity

800X1160X1920mm

900kg

380V

2HP

30kg/cm2

2500Pairs/8H

]]>
YE-902 万能油压压底机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-902 万能油压压底机 Universal Hydraulic Sole Attaching Machine

 

1.       本机器适于各种男女鞋的大底胶粘合和鞋跟的压合,可根据鞋型、鞋种设定调整压着时间及压着大小,压着均匀效果好,特别适用于女式鞋的压合。

2.       本机采用世界名牌液压件,密封件和电器元件,设计合理,性能优异,让新手更易操作。

3.       女鞋可贴合任意高度的鞋跟,男鞋可贴合任意尺寸以特殊鞋头绞链式前压座及鞋跟腹墙刀,机械式控制,使男女鞋皆适用。

4.       作业时宁静无噪音,利于改善工作环境,提高工作效率。 

 

1.    This machine is suitable forall kinds of soles attaching, high performance, and easy operation.

2.    Bar with hydraulic automaticbalance system, no need to adjust the pressure on average, crimping the best.

3.    Quiet noise-free operations,which will help improve the working environment, improve work efficiency.

4.    Bar with hydraulic automaticbalance system, no need to adjust the pressure on average, crimping the best.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

压力Pressure

产量Capacity

800X1160X1920mm

850kg

380V

2HP

30kg/cm2

2500Pairs/8H

]]>
YE-717A 墙式压底机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-717A 墙式压底机 Gantry Walled Sole Attaching Machine

 

1.        压底部份使用油压系统,压力足、效果好、不脱底。

2.        压前后采用PU发泡材质、并有多种规格供选用,可适用任何鞋型之压著,效果最佳。

3.        压边皮革气囊随楦头形状自动变化,内外腰压著均匀。

4.        本机随龙船底及墙式包底的压著情况、可以选择不同的压著方式、以达最佳著效果。

5.        前后压杆采用油压自动平衡系统,不须调整,压力平均,压著效果最好。

6.        压杆机构自动偏摆角度定位设计、使鞋子取放容易,长统或半长统鞋操作上亦非常方便。

7.        鞋前帮的级别可自动调节。

 

1.     This machine adopts oilgauge design. Strong pressure, good attachment.

2.     The toe lasting grade canbe adjusted.

3.     Any height  any sized of heel is allowed.

4.     Blank leather bag withthe shape of the last automatic change, both inside and outside the waistpressing evenly.

5.    Bar with hydraulic automaticbalance system, no need to adjust the pressure on average, crimping the best.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

压力Pressure

产量Capacity

800X1160X1920mm

900kg

380V

1.5kw

30kg/cm2

2500Pairs/8H

]]>
YE-717C 强力墙式压底机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>
YE-717C强力墙式压底机 Force GantryWalled Sole Attaching Machine

 

1.    本机采用全油压设计,压力大,贴合牢固。

2.    压底、压边及前后束紧,可一次完成,亦可个别完成,故平底、包边及特殊包边设计鞋,皆可适用,一机三用,经济效率高。

3.    适用 0 号至18号鞋子,非一般墙式及气囊式压底机可比拟。

4.    使用特殊设计多支密排式油压缸,能配合鞋边不规则之轮廓,而产生压边均衡且没有死角的优良效果。

5.    除压杆相通之设计,更改良了二次压底之功能,使鞋底在成型压底时,油压缸可配合鞋底高低不平的位置,自动伸展到其百分之百贴合位置,使鞋子的贴底更加紧密,不易产生间隙死角。

6.    压杆自动横移定位设计,使鞋子之取放方便无阻碍,能提高产能,且不使鞋面受损,故除一般鞋类外,无论长统或半长统鞋,亦能方便的操作,且效果亦能踏实。

7.    维修方便,零件更换容易,省时省力,提高效率。

 

1.    Oil hydraulic system is employedto guarantee a high pressure and a good pressing affect.

2.    Sole pressing, edge attaching andtoe & back- part constricting can be finished at one time or separately, sothis machine is suitable for flat heel shoe, sports shoe and sports shoe withspecial design.

3.    Available for shoes up to size18. 

4.    Thanks to the specialcharacteristics of oil hydraulic crock, even shoe with an anomalous profile canget a perfect pressing result.

5.    With the improved function ofsecond sole pressing, oil hydraulic crock can adjust automatically according tothe different height of sole and ensure a perfect attaching effect.

6.    Automatic position setting designof hold down makes it easy to load and unload the shoe so as to improve theproductivity and avoid damaging the shoe upper. It is also suitable for highboot and normal boot.

7.    Quick parts replacement and easymachine maintenance.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

压力Pressure

产量Capacity

780X1360X1900mm

1280kg

380V

2.2KW

4MPa

2500Pairs/8H


]]>
E-420AT 电脑带刀片皮机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

E-420AT 电脑带刀片皮机 Computer Band Knife Splitting Machine

 

       本机适用于皮革制品行业中,厚度在8毫米,宽度在420毫米之内的皮革进行片薄,片均的设备。

1.    触摸屏显示,多种语言选择,操作简单。自动检测故障,并精确显示相应的部分。

2.    带刀宽度小于使用要求时能自动显示并报警。电脑能显示更换刀带、压轮的方法和程序。简单、实用。

3.    本机二种动力系统分别控制,节省电力。

4.    本机具有自动进刀、定位装置,刀具无须调整。自动调整刀量与压力板之间隙,片皮精度高。数字显示片皮厚度。

5.    磨刀系统使用金刚砂轮。

6.    无极变速与自动倒退功能。

7.    光学目镜检测刀刃对称。

8.    磨刀粉尘与加工废料,有各自独立的吸尘系统。

9.    具有符合欧艺体标准的安全系统。

 

This machine is used in leather production industryfor slicing rigid and soft leather less than8mmthick and less than420mmwide. It can also slice a slice.

1.     It has a touch screen display for easy operation.Automatic troubleshooting and precise indication of the trouble.

2.  When theknife width is less than required, it will display and alarm automatically.

3.  The computerwill display instructions of how to replace the knife and the pinch roller,which are simple and practical.

4.  Multiple-languageinterface.

5.  The machinehas two drives. Each drive has individual control. Both drives have lowenergy consumption.

6.  It has automaticpositioning device and slicing tools need no adjustment. The machine hastdiamond sharpening wheel which sharpens the blade automatically.

7.  The machineautomatically adjusts the clearance between the cutting tool and the pressureplate and improves the slicing precision.

8.  Steeplesspeed variation is used for of automatically retreating of leather.

9.  You cancheck the knife edge with a lens.

10.  The machine has collecting systems for leatherwaste and powder (which appears after sharpening the blade). This systemsatisfies the environment protection requirement.

11.  The slicing thickness is displayed and adjustable.The machine can display and adjust the thickness of each layer.

12.  Safety system conforms to European standards.

机械尺寸

Dimensions

马达功率

Motor Power

净重Weight

最大片皮宽度

Maximum leather width

最大片皮厚度

Maximum leather thickness

最小片皮厚度

Minimum leather thickness

1600x1300x1100

2.7kw

635kg

420mm

8mm

0.6-0.2mm

]]>
E-420A 带刀片皮机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

E-420A带刀片皮机  Band Knife Splitting Machine


   本机适用于皮革制品行业中,厚度在8毫米,宽度在420毫米之内的皮革进行片薄,片均的设备。

1.    本机具带刀自动推进装置,刀口磨耗减短后,自动推进装置会将带刀往前推,使其刀口恒定维持在一直线上。

2.    精密磨刀装置,操作方便并可确保刀口两边之斜度保持相等。

3.    本机用途多,除具有一般片皮机功能外,尚可同时以模子控制进行皮面边沿的削薄工作。

4.    推进轮下轮子高度及压力均可自由调节,故对材料之适应性相当强。

5.    具有屑皮自动吸出装置,可防止屑皮之阻积。

6.    自动吸出泵经特殊设计,运转安静。

 

Uniform Feeding: Top andbottom drive feed the leather uniformly into the machine.

1.    Dust Collection System:Machine comes equipped with a useful vacuum cleaning system which collects thedust and leather waste quickly.

2.    Longer band knife life: Aspecial sharpening mechanism ensures that the band knife is always sharp andclean for accurate slicing. This Knife inserted into the grinding mechanism bymeans of a simple thumbscrew which sharpens the knife only when needed.

3.    Maintenance: Machine isexceptionally easy to maintain and requires minor maintenance.

4.    Noise Level: Machine runs smoothlyand is exceptionally quiet.

 

机械尺寸

Dimensions

马达功率

Motor Power

净重Weight

最大片皮宽度

Maximum leather width

最大片皮厚度

Maximum leather thickness

最小片皮厚度

Minimum leather thickness

1600x1300x1100

2.7kw

635kg

420mm

8mm

0.6-0.2mm

]]>
YE-309 验钉机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-309 验钉机 Video examining nails machine

 

高分辨率彩色液晶显示器,超级图像增强,图像细节更加清晰。自由伸缩高清

High-resolution colorLCD display, super image enhancement, image detail more clear.

 

机械尺寸Dimensions  

重量Weight

电压Voltage

功率Power

分辨率 Resolution

500X700X1300mm

70kg

220V/50HZ

50W

720P

]]> YE-722 凉鞋掹帮机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-722 凉鞋掹帮机  Sandals lastingmachine

 

专为凉鞋掹帮而设计,结构紧凑、高效。

纯气动架构, 操作简单,便捷,节能、省时。

Designed for sandalslasting, compact and efficient

Pure pneumaticsystem, simple, convenient, energy-saving, time-saving.

 

机械尺寸Dimensions  

重量Weight

空压源Air Pressure

900X500X1250mm

120kg

0.6MPa

]]> YE-520A单头打粗机 Sat, 26 Sep 2020 22:46:27 +0800


YE-520A单头打粗机 Single Shaft Mightiness Roughing Machine

 

1.   本机主要用于鞋帮打磨、拉毛之用。

2.   技术先进、环保意识强、造型美观、符合人机工程学。

 

1.   This machine is mainly usedfor roughing lasted shoes.

2.   Advanced technique, nicestyle.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

620X1000X1100mm

150kg

380V

1.5KW

1500Pairs/8H

]]> YE-520B 双头打粗机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-520B 双头打粗机 Two Shaft Mightiness RoughingMachine

 

1.   本机主要用于鞋帮打磨、拉毛之用。

2.   技术先进、环保意识强、造型美观、符合人机工程学。

 

1.   This machine is mainly used forroughing lasted shoes.

2.   Advanced technique, nice style.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

900X1000X1100mm

150kg

380V

3KW

2000Pairs/8H

]]> YE-523 变频抛光机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-523 变频抛光机 FrequencyConVersion Polishing Machine

 

1.  适用于各种皮料之男女皮鞋抛光功能。

2.  可根据客户需要更换不同型号抛光轮。

3.  环保型机器。

4.  吸尘力强,噪音小。

5.  转速可任意调节。

6.  转速最高能达到每分钟2800转,效率高,平稳性能好,使用简单,方便。

 

1.   Fit for all kinds of shoes polishing.

2.   Can change polishing wheel for customer's demand.

3.   Good for environment.

4.   Strong to collect dust and low noise.

5.   otate speed can be adjusted.

6.   Speed can reach 2800rpm, high efficiency, and goodsteady, easy to operate.

 

机械尺寸

Dimensions

重量

Weight

抛光马达

polishing motor

吸尘马达

dust coveter motor

电压

Voltage

工作噪音

Noise

产量

Capacity

1000X900X1200mm

200kg

1—2HP

0.75HP

380V

83DB

1500Pairs/8H


]]>
YE-932包子鞋整型按摩机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-932包子鞋整型按摩机 Goodyear ModelBeating Machine

 

1.    手动驱动旋转,可随意调整速度。

2.    强渗透力蒸汽可快速软化鞋面。气动按摩锤适合各种型体的鞋面,快速振动碾压,以消除鞋面上的皱纹。

3.    本机型结合蒸汽、绷紧、震动按摩为一体,软化并挤压鞋面,以消除鞋面褶皱,该机配置蒸汽头、8 个伸展式楦头,以保证靴面曲线更加完美,适用于男女鞋类鞋面的平、整、伏、实工序。

4.    本机型改变传统工人(单头)手持方式,成为八工位,省力、省时、操作方便、快捷,提高生产效率。

5.    上下铝模张开迅速、自动平衡、大小可调、电子温控。

6.    定位平衡、准确;能对鞋面的每一个部位进行处理。

7.    可独立操作,分别控制。

 

1.    The driver rotates manually, caneasy to adjust the speed.

2.    The steam can easy to soften theupper.

3.    The Pneumatic massage is suit forall kinds of upper and can eliminate the winkle quickly.

4.    The machine combine with thesteam, Vibration, Battle in one. Soften and squeeze the upper in order toeliminate the winkle. Machine has steam head, eight extended last to make thecurve of the boot perfect.

5.    The machine has changed thetraditional working style to have eight stations, can save labor and time,easily and quickly to operate, efficient working.

6.    The Aluminum last can extendeasily, balance automatic, adjust the size, electronic temperature controller.

7.    Located balance, accurately, candeal with every part of the shoes.

8.    Can operate independent and controlRespectively

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

900x1270x1800mm

250kg

380V/50HZ

5kw

0.6MPa

1200Pairs/8H

]]> YE-933A 单工位靴筒平整机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-933A 单工位靴筒平整机 Boot Ironing Machine

 

1.     本机型结合蒸汽、强力热风为一体软化靴面,双滚轮展平、挤压已软化靴面;同时配制烫斗以及高温电热棒使线缝与折皱平整,以保证靴面曲线更为完美;用于男女靴类的靴筒平、整、伏,实工序。

2.     本机型改变传统人工手持方式,成为自动平衡双悬挂;省力、省时、操作方便、快捷、提高生产效率。

3.     上下铝模张开迅速,自动平衡,大小可调,电子温控。

4.     双铝模具有 360度旋转、定位平衡、准确;能对靴筒的每个部位都能进行烫平。

 

1.     Combines steam and strong hot airtogether to soften upper, with iron and electrical bar to eliminate wrinklesand make a smooth surface.

2.     This machines use the auto-balance ironing doublehead instead of the older manual single head to save labor and improve theefficiency.

3.     The operator can work from any position of the bootquickly and conveniently.

4.     Both the aluminum mold can rotate 360°. Balancedand accurate positioning. Ironing for every position on boot.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air pressure

产量Capacity

710X950X2030mm

280kg

380V

3.5kw

0.6MPa

1000Pairs/8H

]]> YE-933自动靴筒平整机 Sat, 26 Sep 2020 22:46:27 +0800


YE-933自动靴筒平整机  Boot Ironing Machine

 

1.     本机型结合蒸汽、强力热风为一体软化靴面,双滚轮展平、挤压已软化靴面;同时配制双烫斗以及双高温电热棒使线缝与折皱平整,以保证靴面曲线更为完美;用于男女靴类的靴筒平、整、伏,实工序。

2.     本机型改变传统人工(单头)手持方式,成为自动平衡双悬挂;省力、省时、操作方便、快捷、提高生产效率。

3.     上下铝模张开迅速,自动平衡,大小可调,电子温控。

4.     双铝模具有 360度旋转、定位平衡、准确;能对靴筒的每个部位都能进行烫平。

5.     可同时操作;也可独立旋转,分别控制。

 

1.     Combines steam and strong hot air together to soften upper, with iron and electrical bar to eliminate wrinkles and make a smooth surface.

2.     This machines use the auto-balance ironing double head instead of the older manual single head to save labor and improve the efficiency.

3.     The operator can work from any position of the boot quickly and conveniently.

4.     Both the aluminum mould can rotate 360°. Balanced and accurate positioning. Ironing for every position on boot.

5.     The two aluminum molds can operate together as well as move separately to raise the efficiency further.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air pressure

产量Capacity

1250X950X2030mm

280kg

380V

3.5kw

0.6MPa

1500Pairs/8H


]]>
YE-268A 四工位鞋口定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-268A 四工位鞋口定型机 Top-line Beating Machine

 

1.     两冷两热设计,鞋子做完后重新定型鞋口的形状。

2.     可任意高速调整热楦头温度和加热时间。

3.     冷楦头降温恰,冷却时间可调,最低温度可达-20

 

1.     The usage of this machine is to reform the top lineafter finishing shoe.

2.     Willfully high speed adjustment hot shoe lasttemperature and heating-up time.

3.     The cold shoe last decreases temperature quickly,cooling time adjustable, lowest temperature-15℃.

 机械尺寸Dimensions  

重量Weight

功率Power

电压Voltage

空压源Air pressure

产量Capacity

700X1200X1250mm

400kg

0.75KW

220v/50Hz

0.6MPa

3500Pairs/8H


]]> YE-268 二工位鞋口定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-268 二工位鞋口定型机 Top-line Beating Machine

1.    鞋子做完后重新定型鞋口的形状。

2.    可任意高速调整热楦头温度和加热时间。

3.    冷楦头降温恰,冷却时间可调,最低温度可达-20

 

1.    The usage of this machine isto reform the top line after finishing shoe.

2.    Willfully high speedadjustment hot shoe last temperature and heating-up time.

3.    The cold shoe last decreasestemperature quickly, cooling time adjustable, lowest temperature-15℃.

 

机械尺寸Dimensions  

重量Weight

功率Power

电压Voltage

空压源Air pressure

产量Capacity

700X650X1250mm

200kg

0.75KW

220v/50Hz

0.6MPa

2000Pairs/8H

]]> YE-308D 油压钉跟机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-308D 油压钉跟机Hydraulic Nailing Machine


1.     操作简单、省时省工、高效率、故障率低。

2.     可更换上下钉模、速度快。可使用数种钉如:两脚钉、四脚钉、牙钉、镙丝钉等。

3.     有试模开关装置。

 

1.     Simple operation, saving time workers, high efficiency, low failure rate.

2.     Replacement nailing mold quickly. Can use several kinds of nails.

3.     Has test mode switching device.

 

机械尺寸Dimensions  

净重Weight

功率Power

压力Pressure

756X622X1613mm

400Kg

2HP

25-35kg/cm2


]]>
YE-308C 全自动气动钉跟机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-308C全自动气动钉跟机 CompletelyAutomatic Heel-nailing Machine

 

  • 本机适用于任何男女鞋类的钉跟作业。
  • 采用进口PLC控制系统,准确、高效。气油平衡缸能自动调整压着任何高度的鞋跟,且使鞋跟不受损坏。
  • 装钉箱可提供1-12只,6-28mm任何长度的钉子或螺钉。配有自动次序打钉选择。
  • 钉子钉入的角度可避免穿透鞋跟。
  • 自动送钉机构上钉臂具有安全保护装置,可避免伤害操作者。
  • 钉座具有十字灯定位系统,更加保证鞋子打钉位置的准确度。
  • 具有显示器和摄像功能,非常方便的检测长筒马靴打钉的状况。
  • 自动检测功能可快速排除故障,钉序可全部编程控制。

 

  • It is suitable for nailing of any male and femalefootwear.
  • Uses foreign brand of PLC control system, isaccurate, and is highly effective. The gas oil balanced cylinder canautomatically press any shoe heel (any height). Thanks to this system themachine does not damage the heel.
  • The nail storage box may provide nails 1-12 pcs sized6-28mm and also nails or screwsof any length. It has programmable sequence of nailing.
  • The nail spike angle does not let the nail breakthe heel. It also ensures a good fastening of the heel.
  • The machine has an automatic safety system whichprevents the operator from being injured.
  • The machine has laser positioning system. Thissystem guarantees the accuracy of nailing point.
  • The machine has a monitor and the photo camera,very useful for examination of nailing quality.
  • Auto diagnostics system for quick troubleshooting.



机械尺寸  Dimensions

净重 N.W

空压源 Air pressure

功率 Power

电压 Voltage

产量 Capacity

2200X1850X990mm

430kg

0.6Mpa

0.2kw

220V/50Hz

2000/8小时

]]>
YE-308B半自动气动钉跟机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-308B半自动气动钉跟机  Semi Automatic Nailing Machine

 

1.    适用于各种男女靴、鞋的鞋跟装钉作业。

2.    采用油、气混合系统设计。

3.    调节方便,无需定制压模,各种鞋跟均可打钉作业。

4.    装跟质量稳定、可靠、高效。

5.    钉座自动倾斜,便于靴鞋装跟。

6.    根据鞋跟,可选择二角钉、四角钉、牙钉。

 

1.    Is suitable in each kind ofmale woman's boot, shoes' shoe heel stitch work.

2.    Picks the oil used, the gasmixed system design.

3.    Adjusts conveniently, does notneed to have custom-made the die, each kind of shoe heel may drive nails work .

4.    Installs stably with thequality, is reliable, is highly effective.

5.    Sews the place to inclineautomatically, is advantageous for the boots shoes to install with.

 机械尺寸Dimensions

净重Weight

空压源Air pressure

功率Power

电压Voltage

产量Capacity

2200X1850X990mm

415kg

0.6MPa

0.2kw

220V/50HZ

2000Pairs/8H


]]>
YE-308A 油压钉跟机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-308A 油压钉跟机Hydraulic Nailing Machine

 

1.    操作简单、省时省工、高效率、故障率低。

2.    可更换上下钉模、速度快。可使用数种钉如:两脚钉、四脚钉、牙钉、镙丝钉等。

3.    有试模开关装置。

 

1.     Simple operation, savingtime workers, high efficiency, low failure rate.

2.    Replacementnailing mold quickly. Can use several kinds of nails.

3.    Has testmode switching device.

 

机械尺寸Dimensions  

净重Weight

功率Power

压力Pressure

756X622X1613mm

400Kg

2HP

25-35kg/cm2


]]>
YE-911A帮角按摩机(男装) Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-911A帮角按摩机(男装) Uppers Beating Machinefor men’s

 

  1. 磨平、按摩后跟、腰帮、鞋面、鞋头、鞋口线条,消除发角现象使鞋外观升华,棱角分明。
  2. 快速帮实,拉紧鞋面。鞋头、后踵、腰帮分段按摩,具备电热装置,效果极佳。

 

  1. Smoothing by grinding, beating, eliminates sends the angle.
  2. Partition beating, has the heating system.

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

650X800X1350mm

310kg

380V/50HZ

1.8KW

3000Pairs/8H


]]>
YE-911帮角按摩机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-911帮角按摩机(女装) Uppers Beating Machine(for lady's)

 

1.    磨平、按摩后跟、腰帮、鞋面、鞋头、鞋口线条,消除发角现象使鞋外观升华,棱角分明。

2.    快速帮实,拉紧鞋面。鞋头、后踵、腰帮分段按摩,具备电热装置,效果极佳。

 

1.    Smoothing by grinding,beating, eliminates sends the angle.

2.    Partition beating, has theheating system.

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

700X700X1300mm

200kg

380V

1.5HP

3000Pairs/8H


]]>
YE-903 全自动鞋头后踵平整机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-903 全自动鞋头后踵平整机 Automatic Toe And Heel Seat Beating Machine

 

本机适用于任何男女鞋类结帮后,鞋头或后踵的成型按摩。

1.    一机两用,可快速换鞋头或后踵的平整功能。

2.    按摩装置沿鞋轮廓旋转按摩。

3.    压板温度可调节。

4.    后踵按摩压力可调节。

5.    可根据进行按摩的鞋材种类来调节按摩装置的旋转速度。

6.    按照CE标准配备的安全装置。

 

The machine can beating for any kind of shoeor boot with any heel height by hot plate and hammering device, beatingposition can be adjusted.

1.    A machine dual purpose,replaces the toe or heel seat mold fast.

2.    Hammering device rotates alongthe shoe profile.

3.    Adjustable plate temperature.

4.    Adjustable heel beatingpressure.

5.    Hammering rotation speed canbe adjusted according to quality requirement and material.

6.    Safety devices according tothe CE standards.

 

机械尺寸Dimensions

重量Weight

空压源Air pressure

电压Voltage

功率Power

产量Capacity

640X780X1920mm

400kg

0.6Mpa

380V

1KW

2000Pairs/8H


]]>
YE-906 全自动后踵按摩机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-906 全自动后踵按摩机 Automaticheel seat beating machine

 

自动后踵按摩机是一款气动系统,能够对任何高度后跟的任何样式鞋子或靴子通过热板和按摩装置对后踵进行按摩,后踵按摩位置可调节。

1.    按摩装置沿鞋轮廓旋转按摩。

2.    压板温度可调节。

3.    压板根据鞋的形状以鞋头为中心旋转。

4.    后踵按摩压力可调节。

5.    可选择一个周期或两个周期进行按摩。

6.    可根据进行按摩的鞋材种类来调节按摩装置的旋转速度。

7.    机身配备消声材料,在按摩过程中噪音非常小。

8.    按照CE标准配备的安全装置。

 

This machine with pneumatic system. Can beating forany kind of shoe or boot with any heel height by hot plate and hammeringdevice, beating position can be adjusted.

1.    Hammering device rotates alongthe shoe profile.

2.    Adjustable plate temperature.

3.    Heel seat plate rotates aroundtoe based on shoes' shape.

4.    Adjustable heel beatingpressure.

5.    Possibility of one or twobeating cycles.

6.    Hammering rotation speed canbe adjusted according to quality requirement and material.

7.    Very low noise level thanks tosoundproof material.

8.    Safety devices according tothe CE standards.

 

机械尺寸Dimensions

重量Weight

空压源Air Pressure

电压Voltage

功率Power

产量Capacity

700X950X1630mm

390kg

0.6Mpa

380V

0.5KW

2000Pairs/8H


]]>
YE-238B自动急速冷冻定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-238B自动急速冷冻定型机  Automatic Chiller Forming Machine

 


  • 本机采用意大利高效能可调式输关带控制系统。
  • 强劲的冷冻系统,高转速风量循环系统,数十秒内达到-20℃
  • 设计新颖的双动闸门、自动除霜、快速冷冻定型,加速胶水聚合时间。 
  • 节电、节省空间、节省楦头,适合任何鞋履。
  •  
  • Thismachine adopts the Italian high-performance control system for adjustable belt.
  • Powerfulrefrigeration systems, high-speed air flow circulation system, tens of secondsreach-20 ℃.
  • Designof new double-action gates, automatic defrost, fast freeze setting, speed gluepolymerization time.
  • Saveelectricity, save space, save last. 



型号Model

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

YE-238A

3240X900X1600mm

480kg

380V

4kw

2500Pairs/8H

YE-238B

4020X900X1600mm

615kg

380V

5kw

3000Pairs/8H


]]>
YE-238A自动急速冷冻定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-238A自动急速冷冻定型机  Automatic Chiller Forming Machine

 


  • 本机采用意大利高效能可调式输关带控制系统。
  • 强劲的冷冻系统,高转速风量循环系统,数十秒内达到-20℃
  • 设计新颖的双动闸门、自动除霜、快速冷冻定型,加速胶水聚合时间。 
  • 节电、节省空间、节省楦头,适合任何鞋履。
  •  
  • Thismachine adopts the Italian high-performance control system for adjustable belt.
  • Powerfulrefrigeration systems, high-speed air flow circulation system, tens of secondsreach-20 ℃.
  • Designof new double-action gates, automatic defrost, fast freeze setting, speed gluepolymerization time.
  • Saveelectricity, save space, save last. 



型号Model

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

YE-238A

3240X900X1600mm

480kg

380V

4kw

2500Pairs/8H

YE-238B

4020X900X1600mm

615kg

380V

5kw

3000Pairs/8H


]]>
YE-239 两箱真空急速冷冻机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-239 两箱真空急速冷冻机 VavuumChiller Forming Machine

 


  • 旋转循环式输送,节省人工。
  • 强劲的冷冻系统,高转速风量循环系统,数十秒内达到-20℃。
  • 自动除霜、快速冷冻定型,加速胶水聚合时间,并辅以真空压迫鞋面使其更贴楦。
  • 节电、节省空间、节省楦头,适合任何鞋型。
  •  
  • Rotaryfeeding cycle, saving labor.
  • Powerfulrefrigeration systems, high-speed air flow circulation system, tens of secondsreach -20.
  • Designof new double-action gates, automatic defrost, fast freeze setting, speed gluepolymerization time.
  • Saveelectricity, save space, save last.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air pressure

产量Capacity

1250X1600X1800mm

615kg

380V/50HZ

2.5kw

0.6MPa

1500Pairs/8H


]]>
YE-291 真空加硫机(箱式) Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-291 真空加硫机(箱式) Vavuum Vulcanize and Setting Machine

 


  • 真空定型,使鞋面与楦头充分的吻合,提高鞋子的美观程度。
  • 推车式进出料节约鞋楦,降低制造成本。
  • 密闭式加硫系统,节约热能。
  • 体积小、噪声低、除皱双循环系统。
  •  
  • This machineis designed with sealed heating device, vacuum setting in good shape, well fitwith the last. Standard timing for vacuum is 3 to 5 minutes and the temperaturealso adjustable according to material usage.
  • Temperatureadjustable due to different material of toe and heel to reach the best result.
  • Ifleave the shoes cool for 10 to 15 minutes after sole pressing, the counter ofthe shoes will be more rigid and easy for last slipping.
  • To addthe steam air to leather or canvas uppers during the process can upgrade thequality of uppers.
  • Thismachine can keep the settled shoes in constant good shape.
  • Thismachine can save time, power and operating costs. This machine can save powerconsumption and also has very low noise to create comfortable working atmosphere.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air pressure

产量Capacity

1200X1380X1850mm

800kg

380V/50HZ

8kw

0.6MPa

1500Pairs/8H


]]>
YE-292C湿热定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-292C湿热定型机 Steam Forming Machine

 


  • 适用于鞋绷帮结束后,利用高温蒸汽及干燥之热气高效率软化帮面,继而用强风拂化帮面,以达到快速定型效果。
  • 采用喷射式风管设计,特制不锈钢加温室,使热风和蒸气高速对流,以消除帮面内应力,达到去皱与干燥定型之目的,使帮面更贴楦,彻底改变了传统热定型用加热管直接对帮面进行不科学的烘烤的工艺,从而避免了帮面因烘烤面而损坏原有皮质柔韧性与光泽的弊端。
  • 加温室采用内循环结构,有利于加快帮面定型速度,亦可节约电能和鞋楦。
  • 本机以无级调速马达驱动, 速度准确可调,整机运作安全、可靠。
  • 配有直观的数显温度控制器,可依鞋材调至最佳使用温度。
  • 配有蒸汽时间调节控制器,可随时调整蒸汽量。 


备注:YE-292A3.2四通道机型 

              YE-292B4.2四通道机型

YE-292C4.2六通道机型

 


  • Duct with jet design, special stainless steelheating chamber. High-speed convection hot air and steam, the upper morestickers last, completely changed the traditional process, maintainingflexibility and gloss leather.
  • Heating chamber with inner loop structure, speed upthe upper surface of forming speed, saving energy and shoe last.
  • Equipped with temperature controller, adjustaccording to shoes material and get best effect, also with steam controller,can adjust steam power anytime.
  • Timer controls speed.


YE-292A   3.2 meters four channels Model

YE-292B    4.2 meters four channels Model

YE-292C   4.2 meters Six channels Model


型号Model

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

YE-292A

3240X950X1620mm

445kg

380V

12kw

1500Pairs/8H

YE-292B

4200X950X1620mm

600kg

380V

22kw

2000Pairs/8H

YE-292C

4200X1265X1600mm

650kg

380V

25kw

2500Pairs/8H


]]>
YE-292B湿热定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-292B湿热定型机 Steam Forming Machine

 


  • 适用于鞋绷帮结束后,利用高温蒸汽及干燥之热气高效率软化帮面,继而用强风拂化帮面,以达到快速定型效果。
  • 采用喷射式风管设计,特制不锈钢加温室,使热风和蒸气高速对流,以消除帮面内应力,达到去皱与干燥定型之目的,使帮面更贴楦,彻底改变了传统热定型用加热管直接对帮面进行不科学的烘烤的工艺,从而避免了帮面因烘烤面而损坏原有皮质柔韧性与光泽的弊端。
  • 加温室采用内循环结构,有利于加快帮面定型速度,亦可节约电能和鞋楦。
  • 本机以无级调速马达驱动, 速度准确可调,整机运作安全、可靠。
  • 配有直观的数显温度控制器,可依鞋材调至最佳使用温度。
  • 配有蒸汽时间调节控制器,可随时调整蒸汽量。 


备注:YE-292A3.2四通道机型 

              YE-292B4.2四通道机型

YE-292C4.2六通道机型

 


  • Duct with jet design, special stainless steelheating chamber. High-speed convection hot air and steam, the upper morestickers last, completely changed the traditional process, maintainingflexibility and gloss leather.
  • Heating chamber with inner loop structure, speed upthe upper surface of forming speed, saving energy and shoe last.
  • Equipped with temperature controller, adjustaccording to shoes material and get best effect, also with steam controller,can adjust steam power anytime.
  • Timer controls speed.


YE-292A   3.2 meters four channels Model

YE-292B    4.2 meters four channels Model

YE-292C   4.2 meters Six channels Model


型号Model

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

YE-292A

3240X950X1620mm

445kg

380V

12kw

1500Pairs/8H

YE-292B

4200X950X1620mm

600kg

380V

22kw

2000Pairs/8H

YE-292C

4200X1265X1600mm

650kg

380V

25kw

2500Pairs/8H


]]>
YE-292A湿热定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-292A湿热定型机 Steam Forming Machine

 


  • 适用于鞋绷帮结束后,利用高温蒸汽及干燥之热气高效率软化帮面,继而用强风拂化帮面,以达到快速定型效果。
  • 采用喷射式风管设计,特制不锈钢加温室,使热风和蒸气高速对流,以消除帮面内应力,达到去皱与干燥定型之目的,使帮面更贴楦,彻底改变了传统热定型用加热管直接对帮面进行不科学的烘烤的工艺,从而避免了帮面因烘烤面而损坏原有皮质柔韧性与光泽的弊端。
  • 加温室采用内循环结构,有利于加快帮面定型速度,亦可节约电能和鞋楦。
  • 本机以无级调速马达驱动, 速度准确可调,整机运作安全、可靠。
  • 配有直观的数显温度控制器,可依鞋材调至最佳使用温度。
  • 配有蒸汽时间调节控制器,可随时调整蒸汽量。 


备注:YE-292A3.2四通道机型 

              YE-292B4.2四通道机型

YE-292C4.2六通道机型

 


  • Duct with jet design, special stainless steelheating chamber. High-speed convection hot air and steam, the upper morestickers last, completely changed the traditional process, maintainingflexibility and gloss leather.
  • Heating chamber with inner loop structure, speed upthe upper surface of forming speed, saving energy and shoe last.
  • Equipped with temperature controller, adjustaccording to shoes material and get best effect, also with steam controller,can adjust steam power anytime.
  • Timer controls speed.


YE-292A   3.2 meters four channels Model

YE-292B    4.2 meters four channels Model

YE-292C   4.2 meters Six channels Model


型号Model

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

YE-292A

3240X950X1620mm

445kg

380V

12kw

1500Pairs/8H

YE-292B

4200X950X1620mm

600kg

380V

22kw

2000Pairs/8H

YE-292C

4200X1265X1600mm

650kg

380V

25kw

2500Pairs/8H


]]>
YE-293 两箱真空急速加硫机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-293 两箱真空急速加硫机 VavuumVulcanize and Setting Machine

 


  • 旋转循环式输送,节省人工。
  • 强劲的冷冻系统,高转速风量循环系统,数十秒内达到-20℃。
  • 自动除霜、快速冷冻定型,加速胶水聚合时间,并辅与真空压迫鞋面使其更贴楦。
  • 节电、节省空间、节省楦头,适合任何鞋型。
  •  
  • Rotaryfeeding cycle, saving labor.
  • Powerfulrefrigeration systems, high-speed air flow circulation system, tens of secondsreach -20℃.
  • Designof new double-action gates, automatic defrost, fast freeze setting, speed gluepolymerization time.
  • Saveelectricity, save space, save last.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air pressure

产量Capacity

1300X1820X1700mm

800kg

380V/50HZ

11.5kw

0.6MPa

1500Pairs/8H


]]>
YE-228A 鞋内里整形机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-228A 鞋内里整形机 Lining Moulding Machine



  • 适用于男、女鞋头内里的贴合、烫平。
  • 整烫鞋面内里,消除鞋面皱纹,加强定型及贴合效果。
  • 整烫温度可调。
  • 弹性胶膜及其支架,确保即使带有饰物的鞋面也能获得更好的形状。
  •  
  • This machinesuitable for coupling and ironing of shoe lining.
  • Eliminate wrinkles,reinforce shape effect.
  • Ironingtemperature adjustable.
  • Adopt a elasticity mold and adjustablebracket, ensuring get better shape.



机械尺寸Dimensions  

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

680X700X1650mm

110kg

220V/50HZ

0.8KW

0.6MPa

1500Pairs/8H


]]>
YE-228 鞋内里整形机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-228 鞋内里整形机 Lining Moulding Machine

 


  • 适用于男、女鞋头内里的贴合、烫平。
  • 整烫鞋面内里,消除鞋面皱纹,加强定型及贴合效果。
  • 整烫温度可调。
  • 弹性胶膜及其支架,确保即使带有饰物的鞋面也能获得更好的形状。
  •  
  • This machinesuitable for coupling and ironing of shoe lining.
  • Eliminate wrinkles,reinforce shape effect.
  • Ironingtemperature adjustable.
  • Adopt a elasticity mold and adjustablebracket, ensuring get better shape.



机械尺寸Dimensions  

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

900X700X1650mm

160kg

220V/50HZ

1KW

0.6MPa

2500Pairs/8H


]]>
YE-218C 鞋面翘度定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-218C 鞋面翘度定型机Instep Crimping and Combing Machine



  • 对车缝好的鞋面同时进行翘度定型,贴合及烫平,便鞋面兴楦头完美贴合。
  • 定型模万能,适用于各类男、女、童鞋鞋面。
  • 气囊定型模的硬度可由气压调节,以获得不同的鞋面定型翘度。
  • 调整压的角度,可获得不同长度, 翘度的定型效果。
  • 鞋跟高度在2.5-11CM之间的鞋面均适用。
  •  
  • The mould is universal, suitablefor any design of upper
  • (men's, women's, children's) .
  • Thanks to the simple adjustmentsthe procedure of the upper
  •  crimping can be variable and very easy.
  • Thanks to the pneumaticallyadjustable hardness of the cushion,
  • a wider range of angles can beachieved.



械尺寸Dimensions

电压Voltage

重量Weight

功率Power

空气源Air pressure

840X630X1540mm

220V/50HZ

130kg

0.8KW

0.6MPa


]]>
YE-218B 双缸鞋面定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-218B 双缸鞋面定型机 Instep Moulding Machine


1.    本机适用于女高跟鞋和男女靴类在结帮之前对鞋面的定型作业。

2.    胶模采用耐磨耐热硅胶;外铝模温度可达200

3.    定型后,内衫贴全紧密,不起皱,不变形,不起泡,且可减少破损。

4.    可及时造型打样,减少样品开发时间,降低成本,并能更好的满足客户要求。

5.    鞋背的准确定型更易于前帮机的操作,从而可提高产量。

6.    下模可随意调节而达到不同需要的距度,更贴楦。

7.    双工位设计,更能快速提高生产量。

 

1.    This aircraft is suitable for the femalehigh-heeled shoes and the male woman's boot class before forming a group toinstep moulding work.

2.    The jelly mold uses the wear-resistingheat-resisting silica gel; Outside the aluminum mold temperature may reach200℃.

3.    After the moulding,in the unlined upper garmentpastes entire close, the corrugation, does not distort, does not bubble, andmay reduce the breakage.

4.    But the prompt modulding pulls, reduces the sampledevelopment time, reduces the cost, and can the better satisfied customerrequest.

5.    The shoes back's accurate stereotypical changeraises the Productivity.

6.    The stamping die may adjust at will achieves thedifferent need the clearance, pastes the shoetree.

7.    The double location design, can enhance theproductivity fast.

 

机械尺寸Dimensions

电压Voltage

重量Weight

电热系统Heating System

空气源Air pressure

1120X600X1700mm

220V/50HZ

350kg

1.2KW

0.6MPa


]]>
YE-218A 鞋面定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-218A鞋面定型机  Instep Moulding Machine



  • 本机适用于女高跟鞋和男女靴类在结帮之前对鞋面的定型作业。
  • 胶模采用耐磨耐热硅胶;外铝模温度可达200℃
  • 定型后,内衫贴全紧密,不起皱,不变形,不起泡,且可减少破损。
  • 可及时造型打样,减少样品开发时间,降低成本,并能更好的满足客户要求。
  • 鞋背的准确定型更易于前帮机的操作,从而可提高产量。
  • 下模可随意调节而达到不同需要的距度,更贴楦。
  •  
  • This machine is suitable for the women’shigh-heeled shoes and men’s shoes. It moulds the vamp of the shoe before toelasting.
  • The jelly mould is made of wear-resisting andheat-resisting silica gel. Outside of the aluminum mould the temperature mayreach200°C.
  • After moulding, in the upper leather sticks well to the lining.No corrugation, no distortion, no bubbles are there. It reduces the breakage ofthe leather.
  • The moulding is done quickly. The machine reduces time ofdevelopment of the 1st sample, reduces the cost and meets customers’request better.
  • After you use this machine for moulding of the vamp theproductivity of the work on other machines raises.
  • The mould may be adjusted according to the size ofthe shoetree.



机械尺寸Dimensionss

电压Voltage

重量Weight

电热系统Heating System

空气源Air pressure

700X600X1700mm

220V/50HZ

200kg

1.2KW

0.6MPa


]]>
YE-2216C多功能冷热靴面定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-2216C多功能冷热靴面定型机Multifunction Upper Moulding Machine(With Coolingand hotting)

 


  • 本机适用于各式鞋面之脚背翘度定型,对于超大面积超厚之鞋面亦能操作自如。
  • 采用环保式冷冻系统,制冷速度快,冷冻温度可达零下30℃。
  • 用带微调的气缸,可以调整两侧板的距离,排除靴面的皱折,破裂等现象,以达到靴面定型最佳效果。
  • 蒸汽系统可以加热、活化鞋面,使定型更完美。
  • 定型方式可自由选择热定型或冷冻定型。
  •  
  • It is suitable for women’sand men’s boots and can adjust according to the curve of the boot.
  • The operator can changepressure, speed, time, temperature, etc according to material. You can getbetter moulding effect.
  • Use of environmentallyfriendly refrigeration systems, cooling speed, freezing temperatures up tominus 30 .
  • Steam system: heating andreactivating upper, mack it more good effect.
  • Moulding type: hot mouldingand cool moulding.



机械尺寸Dimensionss

空气源 Air pressure

电源Power

产量Capacity

1370X820X1650

0.6MPa

220V/50HZ

1500Pairs/8H


]]>
YE-2216B 自动双弯靴面定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-2216B 自动双弯靴面定型机 Automatic Upper Moulding Machine

 


  • 本机适用于各式鞋面之脚背翘度定型,对于超大面积超厚之鞋面亦能操作自如。
  • 整形上压刀采用二段式行进,操作安全,鞋面中心定位准确。
  • 本机可视鞋面面积大小调整所需行程深度,依材质特性调整所需承受压力,下料速度、定型时间、定型温度、下刀顶料压力,使鞋面定型翘度更加完美。
  • 本机可视鞋面翘度角度简易更换刀模,使鞋面翘度与楦头翘度一致,减少损耗。
  • 用带微调的气缸,可以调整两侧板的距离,排除靴面的皱折,破裂等现象,以达到靴面定型最佳效果。
  • 双弯式靴面定型机使高靴子鞋面曲度整出双翘度定型效果更佳,使翘度切实吻合纸格。
  •  
  • Automatic vamp moulding machine is suitable for women’s and men’s bootsand can adjust according to the curve of the boot. The operator can changepressure, speed, time, temperature, etc according to material. You can getbetter moulding effect.
  • This machine has aself-adjustable wiper which adjusts to the curve of the shoe and preventsdamage of the material.
  • The machine is suitable forany curve of the vamp, and for both thin and think leather.
  • Any kind of vamp, any kind ofleather (natural or artificial leather) can be moulded.
  • The machine is easy to operateand needs only power supply and compressed air. The machine has embeddedheating system.



机械尺寸Dimensionss

空气源 Air pressure

电源Power

产量Capacity

1680X850X700

0.6MPa

220V/50HZ

1500Pairs/8H


]]>
YE-2216A自动单双弯靴面定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-2216A自动单双弯靴面定型机 Automatic Upper Moulding Machine

 


  • 本机适用于各式鞋面之脚背翘度定型,对于超大面积超厚之鞋面亦能操作自如。
  • 整形上压刀采用二段式行进,操作安全,鞋面中心定位准确。
  • 本机可视鞋面面积大小调整所需行程深度,依材质特性调整所需承受压力,下料速度、定型时间、定型温度、下刀顶料压力,使鞋面定型翘度更加完美。
  • 本机可视鞋面翘度角度简易更换刀模,使鞋面翘度与楦头翘度一致,减少损耗。
  • 用带微调的气缸,可以调整两侧板的距离,排除靴面的皱折,破裂等现象,以达到靴面定型最佳效果。
  •  
  • Automatic vamp moulding machine is suitable for women’s and men’s bootsand can adjust according to the curve of the boot. The operator can changepressure, speed, time, temperature, etc according to material. You can getbetter moulding effect.
  • This machine has aself-adjustable wiper which adjusts to the curve of the shoe and preventsdamage of the material.
  • The machine is suitable forany curve of the vamp, and for both thin and think leather.
  • Any kind of vamp, any kind ofleather (natural or artificial leather) can be moulded.
  • The machine is easy to operateand needs only power supply and compressed air. The machine has embeddedheating system.


 

机械尺寸Dimensionss

空气源 Air pressure

电源Power

产量Capacity

1680X850X700

0.6MPa

220V/50HZ

1500Pairs/8H


]]>
YE-262热风蒸汽除皱机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-262热风蒸汽除皱机 Steam Conditioning Machine

 


  • 利用蒸汽和高温气体混合作用于鞋面,去除真皮表面皱纹,不烫伤皮面,保持真皮自然光泽。
  • 可根据皮质自行调节混合气体的湿度及配比度。
  • 蒸汽系统采用超高电子控制台,确保蒸汽量大,热风积温可高达450度。
  • 采用德国风压开关保护器,可使发热丝经久耐用。
  • 空气经过过滤处理,使热风不会发生积碳,适合浅色皮帮面的烫平除皱。
  •  
  • Make use of steam and hot airto smooth the upper surface without hurting upper and keep good quality ofupper natural polish.
  • The humidity of mixed air canbe adjusted according to upper material.
  • The steam system adopts thesuper electronic-control broad which can produce large steam with 450C temperatures.
  • Equipped German switchprotector, heater wear well.
  • Filtered air fit for undertone.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

650X480X1630mm

77kg

220V/50HZ

3KW

1200Pairs/8H


]]>
YE-890 活化机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-890 活化机 Reactivating Machine


  • 该机采用两种特殊加热功能,活化鞋面与鞋底。
  • 可手动和自动操作,由操作者自行选择。
  • 鞋面活化采用特殊的陶瓷电热系统,连续作用于鞋面底部与边缘部分。
  • 鞋底活化采用卤化灯。
  •  
  • The machine has two special heating function to reactivate the upper and sole.
  • Working in manual or automatic system as required by the operator.
  • The upper reactivation is fulfilled by a special clay electro thermal system, continuouseffect on the bottom and side part of the upper.
  • The sole reactivation is done by the halogenation lamp.



机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

660X600X1360mm

105kg

380V/50HZ

6kw

0.6MPa

800Pais/8H


]]>
YE-850 鞋面蒸湿除皱机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-850 鞋面蒸湿除皱机 VampConditioning machine

 


  • 本机适用于鞋面的软化及活化前衬,结合蒸汽、强力热风为一体软化鞋面,使软化后的鞋面更贴楦。
  • 采用电子温控系统,精确控制蒸汽温度。
  • 蒸汽量和热风温度可独立调节。
  • 本机已成为高档马靴必备的理想设备;其结构与性能已深受广大客户所信赖。
  •  
  • The machine isapplicable to the softening of vamp and activation of fore liner operation, makemore closed to last.
  • Electronic temperature controlsystem, precise control of steam temperature.
  • Adjustable steam quantity and hot air temperature.
  • This machine isideal equipment in modern boot making.



机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

680X650X1360mm

250kg

380V/50HZ

4kw

0.6MPa

1200pairs/8H


]]>
YE-830A后踵蒸湿软化机(高压式) Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-830A后踵蒸湿软化机(高压式) Back Part Steamingand Reactivating Machine

 


  • 本机设计用于蒸软鞋子中后帮,将鞋面放入加热的鞋楦后,设定好适当的温度和时间,然后由机器前方的控制按钮控制蒸软功能。
  • 机器通过通过模板中的小孔喷发混合蒸汽来蒸软鞋面,而在鞋底以下,则只有纯热空气喷发,以防止损坏鞋大底上的胶水。
  • 蒸汽量和热风温度可独立调节。



  •  
  • This machine isdesigned for steaming and Reactivating back part. The button where at the frontof machine control the steaming function, after putting the upper into mouldthen setting up the temperature and time.
  • Shoes upper will besoften by hot air and steam, under sole, only spray air avoid destroy thecement in sole.
  • Adjustable steam quantity and hot air temperature.



机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

725X720X1330mm

250kg

380V/50HZ

6.2kw

0.6MPa

1200paris/8H


]]>
YE-830 三工位自动后踵蒸湿软化机(低压式) Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-830 三工位自动后踵蒸湿软化机(低压式) Back Part Steamingand Reactivating Machine

 


  • 自动蒸湿软化后跟鞋面和边缘部分。
  • 蒸汽与热风同时作用,在短时间内软化后跟鞋面和边缘部分。
  • 采用热风和蒸汽相组合,可分别调节。
  • 蒸汽量和热风温度可调节。
  •  
  • Automatic machine for steam and soft counter and side part of the upper.
  • The simultaneous action of the heat dry steam, mixed with hot air, softthe counter and side part in short time.
  • Combination of hot air and steam, adjustable separately.
  • Adjustable steam quantity and hot air temperature.



机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

520X560X1160mm

150kg

380V/50HZ

4.8kw

0.6MPa

1200 Pairs/8H


]]>
YE-820 鞋头蒸湿软化机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-820 鞋头蒸湿软化机 Toe Part Steaming andReactivating Machine

 

本机适用于各式鞋类之热熔胶或热熔胶港宝与鞋面和内里的熔合,及真皮蒸湿软化作业一次完成,使鞋面结帮更加完美,减少鞋面损耗。

PU-COATING 或厚质PU亦适合。

 

1.    This applies to various types of footwear for thehot melt adhesive or hot melt adhesive with the thermoplastic Toe Puff uppers,and in the fusion and leather wet steam softening a complete operation to helpend more perfect uppers, reduce uppers loss.

2.    PU-Coating or thick of PU is also suitable for.


机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

700X760X1350mm

250kg

380V/50HZ

7kw

0.6MPa

1500Pairs/8H


]]>
YE-880 鞋头蒸湿机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-880 鞋头蒸湿机 Toe Upper Steaming Machine

 


  • 本机用于前帮机之前,皮革制之鞋头部分有热胶片着,经本机加热蒸湿,使其软化以利结帮。
  • 温度方面--常温度为100-120度,可依材质调整时间,依皮料所调整约10-20秒。
  •  
  • Themachine is used for humidifying and softening the hot glue sheet of leather tipfor the purpose of upper binding made by upper binding machine.
  • The normal temperature is 100-120 degrees and the time is subject to set  upon material, ranging from 10-20 seconds



机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

  670X860X1650mm

160kg

220V/50HZ

4kw

0.6MPa

2000Pairs/8H


]]>
YE-870 双工位热熔硬头贴合机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-870 双工位热熔硬头贴合机 Thermoplastic ToePuff Coupling Machine

 


  • 本机主要用于鞋帮面皮与片材包头之粘合
  • 片材包头之材料,可采用预涂热熔胶或一般材料预涂上粘合,内里涂上粘胶后,再与帮面粘胶。
  • 本机采用气压传动,利用下下拱型之模具,将帮面皮与片材包头粘合,内里涂上粘胶后,再与帮面粘合,使帮面皮、片材包头与内里粘合为一体。
  • 拱型之上下模具设计,使加工后之帮面,更利于后续工序加工处理。拱型之上模,配有发热装置,使包头上的预涂热熔胶熔化,与帮面压后更为牢固。
  • 压合的时间及温度,均可按加工材料要求,加以适当调校。
  • 在下模带一小杆可将片材包头压着定位后,上模才下降进行压贴,确保片材包头在帮面上位置准确。
  •  
  • The machine is mainly used for vamp leather andsheeting tip binding.
  • The material of sheeting tip can be pasted withvamp by pre-spraying thermoplastic glue or pre-spraying glue over ordinarymaterial and coating with glue inside, then binding with vamp.
  • This machine adopts pneumatic driving and use upperand lower arc moulds to bind the vamp leather with sheeting tip. The bindingshall be done after the inside is coated with glue so that the vamp leather andsheeting tip can be bound together as an integral part.
  • The design of arc shape upper and lower moulds willfacilitate the processing later. The arc upper mould is provided with heatingdevice to melt the pre-coated glue and will make the vamp firmer afterpressing.
  • The time and temperature of pressing can beadjusted upon the requirement of processed materials.
  • Unfed the lower mould, there is a small pole, whichcan conduct pressing by upper mould after the sheeting tip is pressed inalignment. This design can ensure accurate location of sheeting tip on vamp.



机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

510X1000X1630mm

170Kg

220V/50HZ

1.2kw

0.6MPa

2200Pairs/8H


]]>
YE-810 自动套头印置机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-810 自动套头印置机 Thermoplastic Toe Puff Applying Machine

 


  • 印置后的热熔胶压头可完整表现原楦头的形状,且富弹性。
  • 热熔胶套头的周边自动充分削薄,可得较佳前帮效果,并可消除套头边线,美化成品外观。
  • 套头的厚度大小及前后角度可以自由调整,印置位置准确。
  • 免涂胶及浸置甲苯等溶剂,可确保鞋面清洁。
  • 印置后随即冷却,绝无剥落。
  • 本机用热熔胶条,操作容易,生产速度快。
  •  
  • After applying, the Thermoplastic Toe Puff can be a complete shape ofthe original shoe last, and flexibility.
  • Thin edge of the thermoplastic Toe Puff, can be good for lasting, andcan eliminate the edge line , landscaping finished appearance.
  • The thickness of the thermoplastic Toe Puff and angle can be adjusted,location accuracy.
  •  


机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

1200X1400X950mm

220kg

380V/50HZ

1.2kw

0.6MPa

3000 Pairs/8H


]]>
YE-62D 后套预软机(带冷冻) Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-62D 后套预软机(带冷冻) Heel Seat Conditioning Machine (With Cooling)



  • 适用各种材质之港宝预热定型。
  • 本机体积小,可移动,使用方便。
  • 带独立加热装置和冷定型装置。
  • 内外模依客户楦头定制,可获得更完美的外型效果。
  • 调整式夹具使鞋面与楦头100%贴合。
  • 定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。
  • 胶模往下压动作模式。
  •  
  • The molds loading and unloading quick and easy.
  • The machine is small, portable, easy to operate.
  • With heating system and cooling system.
  • The mold can be customized to obtain a more perfectshape effect.
  • The adjustable clamp will achieve 100% jointing ofvamp with last.
  • Electronically controlled heating system,temperature control is more precise, the maximum heating temperature of up to200 °C.
  • Rubber sheet downward pressing action mode.
  • After moulding, the liner, the toe puffs and vampare closely jointed, without crinkling, deformation and without bubbling.



机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

  680×700×1000 mm

80 kg

220V/50HZ

0.2kw

0.6MPa

800Pairs/8H


]]>
YE-62C 后套预软机(桌面型) Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-62C后套预软机(桌面型) HeelSeat Conditioning Machine(Desktop Model

 


  • 适用各种材质之港宝预热定型。
  • 本机体积小,可移动,使用方便。
  • 热定型设计.
  • 内外模依客户楦头定制,可获得更完美的外型效果。
  • 调整式夹具使鞋面与楦头100%贴合。
  • 定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。
  • 胶模往下压动作模式。
  •  
  • The molds loading and unloading quick and easy.
  • The machine is small, portable, easy to operate.
  • With heating system .
  • The mold can be customized to obtain a more perfectshape effect.
  • The adjustable clamp will achieve 100% jointing ofvamp with last.
  • Electronically controlled heating system,temperature control is more precise, the maximum heating temperature of up to200 °C.
  • Rubber sheet downward pressing action mode.
  • After moulding, the liner, the toe puffs and vampare closely jointed, without crinkling, deformation and without bubbling.



机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

680X550X550mm

45kg

220V/50HZ

1kw

0.6MPa

1000Pairs/8H


]]>
YE-62A 后套预软机(带加热) Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-62 后套预软机(带加热) Heel SeatConditioning Machine



  • 适用各种材质之港宝预热定型。
  • 本机体积小,可移动,使用方便。
  • 内外模依客户楦头定制,可获得更完美的外型效果。
  • 调整式夹具使鞋面与楦头100%贴合。
  • 定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。
  • 胶模往下压动作模式。
  •  
  • Themolds loading and unloading quick and easy.
  • Themachine is small, portable, easy to operate.
  • Themold can be customized to obtain a more perfect shape effect.
  • The adjustable clamp willachieve 100% jointing of vamp with last.
  • Electronically controlledheating system, temperature control is more precise, the maximum heatingtemperature of up to200 °C.
  • Rubbersheet downward pressing action mode.
  • After moulding, the liner, thetoe puffs and vamp are closely jointed, without crinkling, deformation andwithout bubbling.



机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

  680×550×1000 mm

45 kg

220V/50HZ

0.2kw

0.6MPa

800Pairs/8H


]]>
YE-62 后套预软机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-62 后套预软机 Heel SeatConditioning Machine



  • 适用各种材质之港宝预热定型。
  • 本机体积小,可移动,使用方便。
  • 内外模依客户楦头定制,可获得更完美的外型效果。
  • 调整式夹具使鞋面与楦头100%贴合。
  • 定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。
  • 胶模往下压动作模式。
  •  
  • Themolds loading and unloading quick and easy.
  • Themachine is small, portable, easy to operate.
  • Themold can be customized to obtain a more perfect shape effect.
  • The adjustable clamp willachieve 100% jointing of vamp with last.
  • Electronically controlledheating system, temperature control is more precise, the maximum heatingtemperature of up to200 °C.
  • Rubbersheet downward pressing action mode.
  • After moulding, the liner, thetoe puffs and vamp are closely jointed, without crinkling, deformation andwithout bubbling.



机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

  680×550×1000 mm

45 kg

220V/50HZ

0.2kw

0.6MPa

800Pairs/8H


]]>
YE-955 双热卧式后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-955 双热卧式后踵定型机 Heating Horizontal Back Part Moulding Machine

 


  • 热内外模温度可个别调整,可适用各种不同材质之鞋面与内里的加温需求。
  • 经预定型后踵套完全与鞋面及内里粘合,不会脱离及内里完全拉平,提高鞋面品质,减少不良率。
  • 斜面机台设计操作简单又方便。
  • 夹具可做行程调整或选择不用,适用各种不同鞋型。
  • 模具依客户鞋型定制,可获最准确定型效果。
  • 特殊反面模可做不良品及再整型,消除皱纹及增加鞋口之美观。
  •  
  • Itis has two heating systems, high capacity.
  • Thetemperature of inner and outer moulds can be regulated automatically accordingto different materials.
  • Aftermoulding, the liner, rubber sheet and vamp are closely jointed withoutcrinkling, deformation and bubbling.
  • Beveltype console design, simple operation and convenient
  • Theadjustable clamp will achieve 100% jointing of vamp with last.
  • Themold can be customized to obtain a more perfect shape effect.
  • Thespecial molds can work in defective Back Part.
  • Electronicallycontrolled heating system, temperature control is more precise, the maximum heatingtemperature of up to200 °C


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

800×510×1590mm

280 kg

220V/50HZ

1.5kw

0.6MPa

1200Pairs/8H


]]>
YE-966单冷单热卧式后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-966单冷单热卧式后踵定型机 Cooling AndHeating Horizontal Back Part Moulding Machine

 


  • 热内外模温度可个别调整,可适用各种不同材质之鞋面与内里的加温需求。
  • 经预定型后踵套完全与鞋面及内里粘合,不会脱离及内里完全拉平,提高鞋面品质,减少不良率。
  • 斜面机台设计操作简单又方便。
  • 夹具可做行程调整或选择不用,适用各种不同鞋型。
  • 模具依客户鞋型定制,可获最准确定型效果。
  • 特殊反面模可做不良品及再整型,消除皱纹及增加鞋口之美观。
  • 环保之冷冻系统独特设计,效率高,冷冻速度最快,可达-30 ℃以上。
  •  
  • Itis has a cooling and a heating system, high capacity.
  • Thetemperature of inner and outer moulds can be regulated automatically accordingto different materials.
  • Aftermoulding, the liner, rubber sheet and vamp are closely jointed withoutcrinkling, deformation and bubbling.
  • Beveltype console design, simple operation and convenient
  • Theadjustable clamp will achieve 100% jointing of vamp with last.
  • Themold can be customized to obtain a more perfect shape effect.
  • Thespecial molds can work in defective Back Part.
  • Useof environmentally friendly refrigeration system, cooling speed, freezingtemperatures up to-30 °C.
  • Electronicallycontrolled heating system, temperature control is more precise, the maximumheating temperature of up to200 °C


.

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

800×510×1590mm

280 kg

220V/50HZ

1.5kw

0.6MPa

1200Pairs/8H


]]>
YE-999卧式后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-999卧式后踵定型机 Horizontal Back PartMoulding Machine



  • 双冷双热模组,产能大,生产效率高。
  • 热内外模温度可个别调整,可适用各种不同材质之鞋面与内里的加温需求。
  • 经预定型后踵套完全与鞋面、内里粘合,不会脱离,内里完全拉平,从而提高鞋面品质,减少不良率。
  • 斜面机台设计操作简单又方便。
  • 夹具可做行程调整或选择不用,适用各种不同鞋型。
  • 模具依客户鞋型定制,可获最准确定型效果。
  • 特殊反面模可做不良品及再整型,消除皱纹及增加鞋口之美观。
  • 环保之冷冻系统独特设计,效率高,冷冻速度最快,可达 -20 以上。
  •  
  • Twocooling and two heating systems, high capacity.
  • Thetemperature of inner and outer moulds can be regulated automatically accordingto different materials.
  • Aftermoulding, the liner, rubber sheet and vamp are closely jointed withoutcrinkling, deformation and bubbling.
  • Beveltype console design, simple operation and convenient
  • Theadjustable clamp will achieve 100% jointing of vamp with last.
  • Themold can be customized to obtain a more perfect shape effect.
  • Thespecial molds can work in defective Back Part.
  • Useof environmentally friendly refrigeration system, cooling speed, freezingtemperatures up to-30 °C.
  • Electronicallycontrolled heating system, temperature control is more precise, the maximumheating temperature of up to 200 °C.



机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

900×1030×1590mm

400 kg

220V/50HZ

2.5kw

0.6MPa

1500Pairs/8H


]]>
YE-833 单工位后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-833 单工位后踵定型机 HeatingBack Part Moulding Machine



  • 适用于任何热熔胶港宝定型。
  • 单工位热定型,带下拉夹爪。
  • 桌面型,更加节省空间。模具拆装方便快捷。
  • 热定型模具可自由定制。
  • 电子温控加热系统,温度控制更准确,最高温可达200 °C。
  •  
  • It is stitch for anytoe puffs material.
  • Itis has a heating system, has pull-down grip jaw.
  • Desktop model, The moldsloading and unloading quick and easy.
  • The mold can be customized toobtain a more perfect shape effect.
  • Electronically controlledheating system, temperature control is more precise, the maximum heatingtemperature of up to200 °C.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

310×455×1150 mm

45 kg

220V/50HZ

0.2kw

0.6MPa

800Pairs/8H


]]>
YE-923四冷气囊式后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-923四冷气囊式后踵定型机 Four Air-BagCooling Back Part Moulding Machine



  • 四冷,带可调节的下拉夹爪。
  • 上模气囊式结构,无需定制胶模,节约成本,采用真空充气和排气方式快捷方便。
  • 只需下模具的装卸更快捷方便。
  • 模具依客户鞋型定制,可获最准确定型效果。
  • 下模外倾于操作员,更加方便操作。
  • 定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。
  • 微电子处理系统。
  • 气囊往下冲压动作模式。
  •  
  • Itis with four cooling system, has adjustable pull-down grip jaw.
  • Usingair-bag type structure does not need to custom plastic mold, save costs.
  • Themolds loading and unloading quick and easy.
  • Themold can be customized to obtain a more perfect shape effect.
  • Themold can be tilted, more convenient operation.
  • The adjustable clamp willachieve 100% jointing of vamp with last.
  • Use of environmentallyfriendly refrigeration system, cooling speed, freezing temperatures up to-30 °C.
  • After moulding, the liner, thetoe puffs and vamp are closely jointed, without crinkling, deformation andwithout bubbling.
  • Micro-electronic processingsystem..
  • Airbag downward pressing action mode.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

930X1520X1980mm

600kg

220V/50HZ

1.5kw

0.6MPa

1300Pairs/8H


]]>
YE-860F气囊式单冷单热后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-860F气囊式单冷单热后踵定型机 AirbagCooling And Heating Back Part Moulding Machine

 


  • 上模气囊式结构,无需定制胶模,节约成本,采用真空充气和排气方式快捷方便。
  • 经预定型后踵套完全与鞋面及内里粘合,不会脱离及内里完全拉平,提高鞋面品质,减少不良率。
  • 斜面机台设计操作简单又方便。
  • 夹具可做行程调整或选择不用,适用各种不同鞋型。
  • 环保之冷冻系统独特设计,效率高,冷冻速度最快,可达 -30 ℃ 以上。
  • 微电子处理系统。
  • Usingair-bag type structure does not need to custom plastic mold, save costs.
  • Themolds loading and unloading quick and easy.
  • Themold can be tilted, more convenient operation.
  • The adjustable clamp willachieve 100% jointing of vamp with last.
  • Use of environmentallyfriendly refrigeration system, cooling speed, freezing temperatures up to -30 °C.
  • Electronically controlledheating system, temperature control is more precise, the maximum heatingtemperature of up to 200°.
  • After moulding, the liner, thetoe puffs and vamp are closely jointed, without crinkling, deformation andwithout bubbling.
  • Micro-electronic processingsystem.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

630×780×1900mm

360kg

220V/50HZ

1.5kw

0.6MPa

1200Pairs/8H

 


]]>
YE-860E双冷气囊式后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-860E双冷气囊式后踵定型机 AirbagCooling Back Part Moulding Machine

 


  • 上模气囊式结构,无需定制胶模,节约成本,采用真空充气和排气方式快捷方便。
  • 经预定型后踵套完全与鞋面及内里粘合,不会脱离及内里完全拉平,提高鞋面品质,减少不良率。
  • 斜面机台设计操作简单又方便。
  • 夹具可做行程调整或选择不用,适用各种不同鞋型。
  • 环保之冷冻系统独特设计,效率高,冷冻速度最快,可达 -3 0 ℃ 以上。
  • 微电子处理系统。
  •  
  • Using air-bag type structure does not need tocustom plastic mold, save costs.
  • The molds loading and unloading quick and easy.
  • The mold can be tilted, more convenient operation.
  • Theadjustable clamp will achieve 100% jointing of vamp with last.
  • Useof environmentally friendly refrigeration system, cooling speed, freezingtemperatures up to -30 °C.
  • Aftermoulding, the liner, the toe puffs and vamp are closely jointed, withoutcrinkling, deformation and without bubbling.
  • Micro-electronicprocessing system.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

630×780×1900mm

360kg

220V/50HZ

1.5kw

0.6MPa

1200Pairs/8H


]]>
YE-860D 单冷单热后踵定型机(带扫刀) Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>



YE-860D 单冷单热后踵定型机(带扫刀)Heating and Cooling Back Part Moulding Machine(With Flanging)

 


  • 后跟鞋面外缘可同时内折定型和一般后跟定型。
  • 适用各种材质之港宝定型。配有扫刀,鞋面可调整等各种功能。
  • 可倾斜式楦头更方便操作。投影灯可获得最准确定型位置。
  • 内外模温度可依材质自行调节。
  • 内外模依客户楦头定制,可获得更完美的外型效果。
  • 调整式夹具使鞋面与楦头100%贴合。
  • 采用环保式冷冻系统,制冷速度快,冷冻温度可达零下30℃。
  • 定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。
  • 微电子处理系统。
  •  
  • Can be followed by inward folding outside upperstereotypes.
  • It’s suitable for moulding of toe puffs made ofdifferent materials.
  • Special wiper with eversion, eversion arc large,perfect shape.
  • The mold can be tilted, more convenient operation.
  • The temperature of inner and outer moulds can beregulated automatically according to different materials.
  • The mold can be customized to obtain a more perfectshape effect.
  • Laser positioning device to obtain more accuratemolded position.
  • The adjustable clamp will achieve 100% jointing ofvamp with last.
  • Use of environmentally friendly refrigerationsystem, cooling speed, freezing temperatures up to-30 °C.
  • Electronically controlled heating system,temperature control is more precise, the maximum heating temperature of up to200 °C.
  • After moulding, the liner, the toe puffs and vampare closely jointed, without crinkling, deformation and without bubbling.
  • Micro-electronic processing system.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

890X850X1950mm

260kg

220V/50HZ

2.7kw

0.6MPa

1500Pairs/8H

 


]]>
YE-860C 单冷单热后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-860C单冷单热后踵定型机 Cooling And Heating Back Part MouldingMachine



  • 热内外模温度可个别调整,可适用各种不同材质之鞋面与内里的加温需求。
  • 经预定型后踵套完全与鞋面及内里粘合,不会脱离及内里完全拉平,提高鞋面品质,减少不良率。
  • 斜面机台设计操作简单又方便。
  • 夹具可做行程调整或选择不用,适用各种不同鞋型。
  • 模具依客户鞋型定制,可获最准确定型效果。
  • 环保之冷冻系统独特设计,效率高,冷冻速度最快,可达 -20 以上。
  • 微电子处理系统。
  •  
  • It is has a cooling system and a heating system,has adjustable pull-down grip jaw, without wiper system.
  • The molds loading and unloading quick and easy.
  • The mold can be customized to obtain a more perfectshape effect.
  • The mold can be tilted, more convenient operation.
  • Theadjustable clamp will achieve 100% jointing of vamp with last.
  • Useof environmentally friendly refrigeration system, cooling speed, freezingtemperatures up to-30 °C.
  • Electronicallycontrolled heating system, temperature control is more precise, the maximumheating temperature of up to200 °C.
  • Aftermoulding, the liner, the toe puffs and vamp are closely jointed, withoutcrinkling, deformation and without bubbling.
  • Micro-electronicprocessing system.
  • Rubber sheet downward pressing action mode.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

630×780×1900mm

360 kg

220V/50HZ

1.5kw

0.6MPa

1200Pairs/8H


]]>
YE-860B 两工位后踵定型机(不摆进式) Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-860B 两工位后踵定型机(不摆进式)Two Heating Back Part Moulding Machine (Without Sway Model)

 


  • 两热,不带扫刀,热模不摆出。
  • 适用各种材质之港宝定型。
  • 可倾斜式楦头更方便操作。
  • 内外模温度可依材质自行调节。
  • 内外模依客户楦头定制,可获得更完美的外型效果。
  • 调整式夹具使鞋面与楦头100%贴合。
  • 定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。
  • 微电子处理系统。
  • 胶模往下压动作模式。
  •  
  • It is has two heating systems, without wiper system,without the mold sway.
  • The molds loading and unloading quick and easy.
  • The mold can be customized to obtain a more perfectshape effect.
  • The mold can be tilted, more convenient operation.
  • Theadjustable clamp will achieve 100% jointing of vamp with last.
  • Electronicallycontrolled heating system, temperature control is more precise, the maximumheating temperature of up to200 °C.
  • Aftermoulding, the liner, the toe puffs and vamp are closely jointed, withoutcrinkling, deformation and without bubbling.
  • Rubber sheet downward pressing action mode.
  •  


机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

  540X850X2000mm

260kg

220V/50HZ

1.5kw

0.6MPa

1500Pairs/8H


]]>
YE-860A 气囊式两热后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-860A气囊式两热后踵定型机 Two Hot Air-Bag Back Part Muolding Machine

 


  • 双热气囊,带可调节的下拉夹爪。
  • 上模气囊式结构,无需定制胶模,节约成本,采用真空充气和排气方式快捷方便。
  • 只需下模具的装卸更快捷方便。
  • 下模具可外倾于操作员。
  • 微电子处理系统。
  •  
  • It is has two heating systems, without wiper system.
  • The molds loading and unloading quick and easy.
  • Using air-bag type structure does not need tocustom plastic mold, save costs.
  • The mold can be customized to obtain a more perfectshape effect.
  • The mold can be tilted, more convenient operation.
  • Theadjustable clamp will achieve 100% jointing of vamp with last.
  • Electronicallycontrolled heating system, temperature control is more precise, the maximumheating temperature of up to200 °C.
  • Aftermoulding, the liner, the toe puffs and vamp are closely jointed, withoutcrinkling, deformation and without bubbling.
  • Rubber sheet downward pressing action mode.
  • Micro-electronicprocessing system.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

540X850X2000mm

260Kg

220V/50HZ

1.5kw

0.6MPa

1500Pairs/8H


]]>
YE-860两热后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-860两热后踵定型机 Two Heating Back Part Muolding Machine

 


  • 两热,不带扫刀。
  • 适用各种材质之港宝定型。
  • 可倾斜式楦头更方便操作。
  • 内外模温度可依材质自行调节。
  • 内外模依客户楦头定制,可获得更完美的外型效果。
  • 调整式夹具使鞋面与楦头100%贴合。
  • 定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。
  • 微电子处理系统。
  • 胶模往下压动作模式。
  •  
  • It is has two heating systems, without wiper system.
  • The molds loading and unloading quick and easy.
  • The mold can be customized to obtain a more perfectshape effect.
  • The mold can be tilted, more convenient operation.
  • Theadjustable clamp will achieve 100% jointing of vamp with last.
  • Electronicallycontrolled heating system, temperature control is more precise, the maximumheating temperature of up to200 °C.
  • Aftermoulding, the liner, the toe puffs and vamp are closely jointed, withoutcrinkling, deformation and without bubbling.
  • Rubber sheet downward pressing action mode.
  • Micro-electronicprocessing system.


机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

540X850X2000mm

260Kg

220V/50HZ

1.5kw

0.6MPa

1500Pairs/8H


]]>
YE-922B 带蒸汽后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-922B 经济型带蒸汽后踵定型机 EconomyVersion Steam Model Back Part Moulding Machine



  • 两冷六热,带可调节的下拉夹爪。
  • 上模气囊式结构,无需定制胶模,节约成本,采用真空充气和排气方式快捷方便。
  • 只需下模具的装卸更快捷方便。
  • 模具依客户鞋型定制,可获最准确定型效果。
  • 下模外倾于操作员,更加方便操作。
  • 定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。
  • 微电子处理系统。
  •  
  • It is with two cooling systems and six heating windsystems, has adjustable pull-down grip jaw.
  • Usingair-bag type structure does not need to custom plastic mold, save costs
  • Themolds loading and unloading quick and easy.
  • Themold can be customized to obtain a more perfect shape effect.
  • Themold can be tilted, more convenient operation.
  • Theadjustable clamp will achieve 100% jointing of vamp with last.
  • Useof environmentally friendly refrigeration system, cooling speed, freezingtemperatures up to-30 °C.
  • Electronicallycontrolled heating system, temperature control is more precise, the maximumheating temperature of up to200 °C.
  • Aftermoulding, the liner, the toe puffs and vamp are closely jointed, withoutcrinkling, deformation and without bubbling.
  • Micro-electronicprocessing system.
  • Air bag downward pressing action mode.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

930X1700X1980mm

600kg

220V/50HZ

2.7kw

0.6MPa

1300Pairs/8H


]]>
YE-863A 气囊式冷热后踵定型 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-863A气囊式冷热后踵定型机 Air-Bag Back Part Moulding Machine



  • 两冷两热,带可调节的下拉夹爪。
  • 上模气囊式结构,无需定制胶模,节约成本,采用真空充气和排气方式快捷方便。
  • 只需下模具的装卸更快捷方便。
  • 下模具可外倾于操作员。
  • 移动式模具柱。
  • 冷模的下滑式下拉夹爪使鞋面高的女鞋(靴)得到完美的定型。
  • 微电子处理系统。
  • 气囊往下冲压动作模式。
  •  
  • It is with two cooling system and two heatingsystem, has adjustable pull-down grip jaw.
  • Using air-bag type structure does not need tocustom plastic mold, save costs.
  • The molds loading and unloading quick and easy.
  • The mold can be customized to obtain a more perfectshape effect.
  • Special wiper with eversion, eversion arc large,perfect shape.
  • The mold can be tilted, more convenient operation.
  • Theadjustable clamp will achieve 100% jointing of vamp with last.
  • Useof environmentally friendly refrigeration system, cooling speed, freezingtemperatures up to-30 °C.
  • Electronicallycontrolled heating system, temperature control is more precise, the maximumheating temperature of up to200 °C.
  • Aftermoulding, the liner, the toe puffs and vamp are closely jointed, withoutcrinkling, deformation and without bubbling.
  • Micro-electronicprocessing system..
  • Air bag downward pressing action mode.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

890X1450X2000mm

620Kg

220V/50HZ

2.7kw

0.6MPa

1500Pairs/8H


]]>
YE-922A 经济型中间气囊后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-922A经济型中间气囊后踵定型机 EconomyVersion Air-Bag Back Part Moulding Machine



  • 两冷两热,带可调节的下拉夹爪。
  • 上模气囊式结构,无需定制胶模,节约成本,采用真空充气和排气方式快捷方便。
  • 只需下模具的装卸更快捷方便。
  • 模具依客户鞋型定制,可获最准确定型效果。
  • 下模外倾于操作员,更加方便操作。
  • 定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。
  • 微电子处理系统。
  •  
  • Itis with two cooling system and two heating system, has adjustable pull-downgrip jaw.
  • Usingair-bag type structure does not need to custom plastic mold, save costs
  • Themolds loading and unloading quick and easy.
  • Themold can be customized to obtain a more perfect shape effect.
  • Themold can be tilted, more convenient operation.
  • Theadjustable clamp will achieve 100% jointing of vamp with last.
  • Useof environmentally friendly refrigeration system, cooling speed, freezingtemperatures up to-30 °C.
  • Electronicallycontrolled heating system, temperature control is more precise, the maximumheating temperature of up to200 °C.
  • Aftermoulding, the liner, the toe puffs and vamp are closely jointed, withoutcrinkling, deformation and without bubbling.
  • Micro-electronicprocessing system.
  • Air bag downward pressing action mode.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

930X1520X1980mm

600kg

220V/50HZ

2.7kw

0.6MPa

1300Pairs/8H


]]>
YE-922 经济型后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-922 经济型后踵定型机 EconomyVersion Back Part Moulding Machine



  • 两冷两热,带可调节的下拉夹爪。
  • 上模气囊式结构,无需定制胶模,节约成本,采用真空充气和排气方式快捷方便。
  • 只需下模具的装卸更快捷方便。
  • 模具依客户鞋型定制,可获最准确定型效果。
  • 下模外倾于操作员,更加方便操作。
  • 定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。
  • 微电子处理系统。
  •  
  • It is with two cooling systems and two heatingsystems, has adjustable pull-down grip jaw.
  • The molds loading and unloading quick and easy.
  • The mold can be customized to obtain a more perfectshape effect.
  • Special wiper with eversion, eversion arc large,perfect shape.
  • The mold can be tilted, more convenient operation.
  • Theadjustable clamp will achieve 100% jointing of vamp with last.
  • Useof environmentally friendly refrigeration system, cooling speed, freezingtemperatures up to-30 °C.
  • Electronicallycontrolled heating system, temperature control is more precise, the maximumheating temperature of up to200 °C.
  • Aftermoulding, the liner, the toe puffs and vamp are closely jointed, withoutcrinkling, deformation and without bubbling.
  • Micro-electronicprocessing system.
  • Rubber sheet downward pressing action mode.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

930X1520X1980mm

600kg

220V/50HZ

2.7kw

0.6MPa

1300Pairs/8H

 


]]>
YE-863B 六工位后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-863B 六工位后踵定型机 Two Cooling And Four Heating Back Part Moulding Machine



  • 两冷四热,带扫刀,带可调节的下拉夹爪。
  • 模具的装卸快捷方便。
  • 模具可按要求定做。
  • 扫刀系统用小手轮调节,快捷方便。
  • 下模可外倾于操作员。
  • 移动式模具柱。
  • 冷模的下滑式下拉夹爪使鞋面的女鞋(靴)得到完美造型。
  • 微电子处理系统。
  •  
  • It is with two cooling system and four heatingsystem, has adjustable pull-down grip jaw.
  • The molds loading and unloading quick and easy.
  • The mold can be customized to obtain a more perfectshape effect.
  • Special wiper with eversion, eversion arc large,perfect shape.
  • The mold can be tilted, more convenient operation.
  • The adjustable clamp will achieve 100% jointing ofvamp with last.
  • Use of environmentally friendly refrigerationsystem, cooling speed, freezing temperatures up to-30 °C.
  • Electronically controlled heating system,temperature control is more precise, the maximum heating temperature of up to200 °C.
  • After moulding, the liner, the toe puffs and vampare closely jointed, without crinkling, deformation and without bubbling.
  • Micro-electronic processing system.
  • Rubber sheet downward pressing action mode.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

  900X2050X2000mm

720kg

220V/50HZ

2.7kw

0.6MPa

1300Pairs/8H


]]>
YE-866A 两冷两热后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-866A 两冷两热后踵定型机 Two Cold & Two Hot Back Part Moulding Machine

 


  • 后跟鞋面外缘可同时内折定型和一般后跟定型。适用各种材质之港宝定型。
  • 配有扫刀,鞋面可调整等各种功能。
  • 可倾斜式楦头更方便操作。
  • 内外模温度可依材质自行调节。
  • 内外模依客户楦头定制,可获得更完美的外型效果。投影灯可获得最准确定型位置。
  • 调整式夹具使鞋面与楦头100%贴合。
  • 采用环保式冷冻系统,制冷速度快,冷冻温度可达零下30℃。
  • 定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。
  • 微电子处理系统。
  • 楦头往上冲压动作模式。
  •  
  • Can be followed by inward folding outside upperstereotypes.
  • It’s suitable for moulding of toe puffs made of differentmaterials.
  • Special wiper with eversion, eversion arc large,perfect shape.
  • The mold can be tilted, more convenient operation.
  • The temperature of inner and outer moulds can beregulated automatically according to different materials.
  • The mold can be customized to obtain a more perfectshape effect.
  • Laser positioning device to obtain more accuratemolded position.
  • The adjustable clamp will achieve 100% jointing ofvamp with last.
  • Use of environmentally friendly refrigerationsystem, cooling speed, freezing temperatures up to-30 °C.
  • Electronically controlled heating system,temperature control is more precise, the maximum heating temperature of up to200 °C.
  • After moulding, the liner, the toe puffs and vampare closely jointed, without crinkling, deformation and without bubbling.
  •  Micro-electronic processing system.
  • Last upward action mode. 


机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

890X2200X2000mm

640kg

220V/50HZ

2.7kw

0.6MPa

1500Pairs/8H



]]>
YE-866 两冷两热后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-866 两冷两热后踵定型机 Two Cold & Two Hot Back Part Moulding Machine

 

1.     后跟鞋面外缘可同时内折定型和一般后跟定型。适用各种材质之港宝定型。

2.     配有扫刀,鞋面可调整等各种功能。

3.     可倾斜式楦头更方便操作。

4.     内外模温度可依材质自行调节。

5.     内外模依客户楦头定制,可获得更完美的外型效果。投影灯可获得最准确定型位置。

6.     调整式夹具使鞋面与楦头100%贴合。

7.     采用环保式冷冻系统,制冷速度快,冷冻温度可达零下30℃。

8.     定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。

9.     微电子处理系统。

10.  楦头往上冲压动作模式。

 

1.     Can be followed by inward folding outside upperstereotypes.

2.     It’s suitable for moulding of toe puffs made of differentmaterials.

3.     Special wiper with eversion, eversion arc large,perfect shape.

4.     The mold can be tilted, more convenient operation.

5.     The temperature of inner and outer moulds can beregulated automatically according to different materials.

6.     The mold can be customized to obtain a more perfectshape effect.

7.     Laser positioning device to obtain more accuratemolded position.

8.     The adjustable clamp will achieve 100% jointing ofvamp with last.

9.     Use of environmentally friendly refrigerationsystem, cooling speed, freezing temperatures up to-30 °C.

10.  Electronically controlled heating system,temperature control is more precise, the maximum heating temperature of up to200 °C.

11.  After moulding, the liner, the toe puffs and vampare closely jointed, without crinkling, deformation and without bubbling.

12.  Micro-electronic processing system.

13.  Last upward action mode.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

890X2200X2000mm

640kg

220V/50HZ

2.7kw

0.6MPa

1500Pairs/8H

]]>
YE-869莫卡辛鞋冷热后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-869莫卡辛鞋冷热后踵定型机 Mocassin Shoes Back Part Moulding Machine



  • 专门针对莫卡辛鞋优化的定型机构,定型更方便,效果更佳。
  • 两冷两热,带扫刀,带可调节的下拉夹爪。
  • 模具的装卸快捷方便。
  • 模具可按要求定做。
  • 下模可外倾于操作员。
  • 移动式模具柱。
  • 冷模的下滑式下拉夹爪使鞋面完美造型。
  • 微电子处理系统。
  • 胶模往下压动作模式。
  •  
  • Specially optimized system institutions for Mocassinshoes.
  • It is with two cooling system and two heating system,has adjustable pull-down grip jaw.
  • The mold can be customized.
  • The mold can be tilted, more convenient operation.
  • The adjustable clamp will achieve 100% jointing ofvamp with last.
  • Use of environmentally friendly refrigeration system,cooling speed, freezing temperatures up to -30 °C.
  • Electronically controlled heating system, temperaturecontrol is more precise, the maximum heating temperature of up to 200 °C.
  • Micro-electronic processing system.
  • Rubber sheet downward pressing action mode.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

890X1450X2000mm

620kg

220V/50HZ

2.7kw

0.6MPa

1300Pairs/8H

]]>
YE-863 冷热后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-863 冷热后踵定型机 Back Part Moulding Machine



  • 两冷两热,带扫刀,带可调节的下拉夹爪。
  • 模具的装卸快捷方便。
  • 模具可按要求定做。
  • 扫刀系统用小手轮调节,快捷方便。
  • 下模可外倾于操作员。
  • 移动式模具柱。
  • 冷模的下滑式下拉夹爪使鞋面的女鞋(靴)得到完美造型。
  • 微电子处理系统。
  • 胶模往下压动作模式。
  •  
  • It is with two cooling system and two heatingsystem, has adjustable pull-down grip jaw.
  • The molds loading and unloading quick and easy.
  • The mold can be customized to obtain a more perfectshape effect.
  • Special wiper with eversion, eversion arc large,perfect shape.
  • The mold can be tilted, more convenient operation.
  • Theadjustable clamp will achieve 100% jointing of vamp with last.
  • Useof environmentally friendly refrigeration system, cooling speed, freezingtemperatures up to-30 °C.
  • Electronicallycontrolled heating system, temperature control is more precise, the maximumheating temperature of up to200 °C.
  • Aftermoulding, the liner, the toe puffs and vamp are closely jointed, withoutcrinkling, deformation and without bubbling.
  • Micro-electronicprocessing system.
  • Rubber sheet downward pressing action mode.


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

890X1450X2000mm

620kg

220V/50HZ

2.7kw

0.6MPa

1300Pairs/8H

]]>
YE-865 外翻式后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-865 外翻式后踵定型机 Stitch Down Process Shoes Back Part Moulding Machine


  • 1. 此机主要适合做外翻鞋使用,适于热熔胶和热熔片后套的定型,节省空间,操作简单方便。
  • 2. 高速联接垫衬达到快速更换,垫衬压头直接压楦头。
  • 3. 设有外翻专用扫刀,外翻弧度大,定型完美。
  • 4. 模具倾向于操作者,更方便操作,模具柱可移动。
  • 5. 采用电子控制加热系统,温度控制更精确,最高加热温度可达200℃
  • 6. 采用环保式冷冻系统,制冷速度快,冷冻温度可达-30℃
  • 7. 微电子处理系统。


机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

  900x1450x2000mm

640kg

220V/50HZ

2.7kw

0.6MPa

1300Pairs/8H

]]>
YE-868 鞋头冷热定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-868 鞋头冷热定型机 Toe Part Cooling & Heating Forming Machine



  • 1. 一般鞋头预定型或外翻鞋定型。
  • 2. 适用各种材质之港宝定型。
  • 3. 蒸汽系统可以加热、活化鞋头和鞋面。
  • 4. 冷模夹具使用铁氟龙束组配合楦头模,可依鞋面厚度任意调整,定型效果完美。
  • 5. 楦头用铁弗龙束带组依客户楦头制作,准确度高。
  • 6. 本机热模设有蒸汽系统,使鞋面加温过程更具弹性与光泽。
  • 7. 采用环保式冷冻系统,制冷速度快,冷冻温度可达零下30℃。
  • 8. 定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。
  • 9. 胶模往下压动作模式。


机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

900X1600X1700mm

370Kg

220V/50HZ

2.7kw

0.6MPa

1500Pairs/8H

]]>
YE-899 四冷四热旋转式后踵定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-899四冷四热旋转式后踵定型机 Four Cold AndFour Hot Back Part Moulding Machine

 


  • 1. 后跟鞋面外缘可同时内折定型和一般后跟定型。适用各种材质之港宝定型。
  • 2. 配有扫刀,可倾斜式楦头模更方便操作。
  • 3. 内外模温度可依材质自行调节。
  • 4. 内外模依客户楦头定制,可获得更完美的定型效果。投影灯可获得最准确定型位置。
  • 5. 自动旋转,占用空间小,效率更高。
  • 6. 采用环保式冷冻系统,制冷速度快,冷冻温度可达零下30℃。
  • 7. 定型后使内衬、胶片,鞋面紧密贴合,不起皱、不变形、不起泡。
  • 8. 微电子处理系统。
  • 9. 楦头往上冲压动作模式。




机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

1700X1600X2100mm

800kg

220V/50HZ

1.7kw

0.6MPa

2000Pairs/8H

]]>
多层智能重型双头中底切割机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

]]>
全自动智能双头中底切割机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

]]>
Strip Board Sat, 26 Sep 2020 22:46:27 +0800

]]>
YE-102A 过压机 Sat, 26 Sep 2020 22:46:27 +0800 YE-102A 过压机]]> YE-116 条板贴合机 Sat, 26 Sep 2020 22:46:27 +0800 YE-116 条板贴合机]]> YE-117 双边削边机 Sat, 26 Sep 2020 22:46:27 +0800 YE-117 双边削边机]]> YE-115 分条机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>
YE-115 分条机]]>
意大利原装刀具 Sat, 26 Sep 2020 22:46:27 +0800 ]]> 意大利原装刀具 Sat, 26 Sep 2020 22:46:27 +0800 ]]> YE-520B 双头打粗机 Sat, 26 Sep 2020 22:46:27 +0800

YE-520B 双头打粗机 Two Shaft Mightiness Roughing Machine

 

1.    本机主要用于鞋帮打磨、拉毛之用。

2.    技术先进、环保意识强、造型美观、符合人机工程学。

 

1.    Thismachine is mainly used for roughing lasted shoes.

2.    Advancedtechnique, nice style.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

900X1000X1100mm

150kg

380V

3KW

2000Pairs/8H

]]>
YE-520A 单头打粗机 Sat, 26 Sep 2020 22:46:27 +0800

YE-520A单头打粗机 SingleShaft Mightiness Roughing Machine

 

1.    本机主要用于鞋帮打磨、拉毛之用。

2.    技术先进、环保意识强、造型美观、符合人机工程学。

 

1.    Thismachine is mainly used for roughing lasted shoes.

2.    Advancedtechnique, nice style.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

620X1000X1100mm

150kg

380V

1.5KW

1500Pairs/8H

 

]]>
YE-523 变频抛光机 Sat, 26 Sep 2020 22:46:27 +0800 YE-523 变频抛光机 Frequency ConVersion Polishing Machine

 

 

1.           适用于各种皮料之男女皮鞋抛光功能。

2.           可根据客户需要更换不同型号抛光轮。

3.           环保型机器 。

4.           吸尘力强,噪音小。

5.           转速可任意调节。

6.           转速最高能达到每分钟2800转,效率高,平稳性能好,使用简单,方便。

 

1.    Fit for all kinds ofshoes polishing.

2.    Can change polishingwheel for customer's demand.

3.    Good for environment.

4.    Strong to collectdust and low noise.

5.    otate speed can beadjusted.

6.    Speed can reach2800rpm, high efficiency, and good steady, easy to operate.

 

机械尺寸

Dimensions

重量

Weight

抛光马达

polishing motor

吸尘马达

dust coveter motor

电压

Voltage

工作噪音

Noise

产量

Capacity

1000X900X1200mm

200kg

1—2HP

0.75HP

380V

83DB

1500Pairs/8H


]]>
YE-104 吸尘器 Sat, 26 Sep 2020 22:46:27 +0800 YE-527 冲沟机 Sat, 26 Sep 2020 22:46:27 +0800 YE-612 横式打粗机 Sat, 26 Sep 2020 22:46:27 +0800


YE-612 横式打粗机 HorizontalRoughing Machine


 

本机适用于鞋面及鞋底抛光打粗后以利擦胶及贴底。最高转速1400-6500转,分级可调。

 

The machine suitable does the instep and shoe solepolishing in order to help cementing and pastes the shoe sole. Highestrotational speed 1400-6500 rpm, Speed classifying adjustable.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

1125X475X650mm

110kg

220V/380V

2-3HP

2000Pairs/8H


]]>
YE-2503B 软轮强力上黄胶机 Sat, 26 Sep 2020 22:46:27 +0800 YE-2503A 软轮强力上黄胶机 Sat, 26 Sep 2020 22:46:27 +0800 YE-2503A 软轮强力上黄胶机]]> YE-220 碗刀削皮机 Sat, 26 Sep 2020 22:46:27 +0800 YE-2305 中底鸡眼机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-2305 中底鸡眼机 InsoleEyelet Machine


本机为插中纸板与腰铁铆合之专用鸡眼机。

 

1.    Well suited forfixing small eyelets on insoles. It is used in the production of leather shoes,boots, etc.     

2.    Eyelet diameter is inthe range of 2.4-3.0mm  

3.    Eyelet length isshorter than10mm. 

 

机械尺寸Dimensions

重量Weight

功率Power

电压Voltage

产量Capacity

1100X650X1300mm

80kg

0.25HP

220V/380V

3000Pairs/8H

]]>
YE-2218CS 双头中底插中铣削机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-2218CS 双头自动中底插中铣削机 Automatic InsoleSkiving Machine

 

  • 1.   本机装有电子计数器,能准确计数。
  • 2.   调整方便,操作简单,故障率低,换刀容易,是中底厂必需设备。
  • 3.   左右档板可以轻松调节,使半插中底板所要求的任意切削宽度、坡度。
  • 4.   本机采用直线横向送料不同厚度的材料(0.75-4.0mm)之间插中厚度均不需做调整,加工后的中底长度、坡度一致。

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

1550X620X1020mm

300kg

380V

2.2KW

15000Pairs/8H

]]>
YE-2206 全自动高速中底削边机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-2206 全自动高速中底削边机 Automatic Insole Trimming Machine

 

1.    本机可以鞋跟斜度修削中底边缘。

2.    采用无段式手摇调速马达,可任意调整切削速度。

3.    切削面平滑均匀,品质稳定。

4.    外接吸尘器,可将切削屑完全吸除,无肮乱污染,延长机械寿命。


 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

950X900X1050mm

150kg

380V

1HP

2000Pairs/8H

]]>
YE-525 摇臂式油压裁断机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-525 摇臂式油压裁断机 Rocker Arm Type Hydraulic Cutting Machine



  • 1. 操作省力、简单、故障率低、裁断力强、裁断速度快,安全性高。
  • 2. 裁断点的设定机构简单、方便、准确、操作简单、容易维修保养。
  • 3. 微调装置,可轻易得到最佳之裁断行程,延长刀模及裁断胶板的使用寿命。
  • 4. 主轴特别设计采用自动循环润滑系统,无人工疏忽打油而使机件损坏之顾虑。
  • 5. 裁断下压接触刀模时自动慢切,使材料最上层与最下层几乎没有尺寸误差。
  • 6. 作业时宁静,可大辐度降低工厂噪音,改善工作环境,提高工作效率。

 

型号Model

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

最大裁断力Max Cutting Power

YE-525

1050X1000X1500mm

750Kg

380V

1.5kw

20T


]]>
YE-530 四柱式精密裁断机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-530 四柱式精密裁断机 Four Precise Type Column Hydraulic Cutting Machine

 

1.    双油缸,精密四柱自动平衡连杆结构,保证每一个裁断位置裁断深度完全相同。

2.    有特长冲程设定,适应特厚的材料及特高的刀模冲裁。

3.    裁断下压接触裁刀时自动慢切,使裁断料最上层与最下层没有尺寸误差。

4.    特有设定构造,配合裁断刀及裁断深度,使冲程调整简单,准确。

5.    中央自动润滑系统确保机器精密度及提高机器耐用度。


机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

最大裁断力Max Cutting Power

产量Capacity

1330X2330X1760mm

1500Kg

380V

4kw

30T

25000/8小时

]]>
YE-526B 平面式油压裁断机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-526B 平面式油压裁断机 Hydraulic Plane Cutting Machine

 


  • 1.  操作省力、简单、故障率低、裁断力强、裁断速度快,安全性高。
  • 2.  裁断点的设定机构简单、方便、准确、操作简单、容易维修保养。
  • 3.  微调装置,可轻易得到最佳之裁断行程,延长刀模及裁断胶板的使用寿命。
  • 4.  主轴特别设计采用自动循环润滑系统,无人工疏忽打油而使机件损坏之顾虑。
  • 5.  裁断下压接触刀模时自动慢切,使材料最上层与最下层几乎没有尺寸误差。
  • 6.  作业时宁静,可大辐度降低工厂噪音,改善工作环境,提高工作效率。



型号Model

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

最大裁断力Max Cutting Power

产量Capacity

YE-526A

1900X900X1700mm

1500Kg

380V

3kw

30T

25000Pairs/8H

YE-526B

1700X850X1700mm

1500Kg

380V

3kw

25T

25000Pairs/8H

]]>
YE-526A 平面式油压裁断机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>



YE-526A/B 平面式油压裁断机 Hydraulic Plane Cutting Machine

 

  • 1.  操作省力、简单、故障率低、裁断力强、裁断速度快,安全性高。
  • 2.  裁断点的设定机构简单、方便、准确、操作简单、容易维修保养。
  • 3.  微调装置,可轻易得到最佳之裁断行程,延长刀模及裁断胶板的使用寿命。
  • 4.  主轴特别设计采用自动循环润滑系统,无人工疏忽打油而使机件损坏之顾虑。
  • 5.  裁断下压接触刀模时自动慢切,使材料最上层与最下层几乎没有尺寸误差。
  • 6.  作业时宁静,可大辐度降低工厂噪音,改善工作环境,提高工作效率。

 

型号Model

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

最大裁断力Max Cutting Power

产量Capacity

YE-526A

1900X900X1700mm

1500Kg

380V

3kw

30T

25000Pairs/8H

YE-526B

1700X850X1700mm

1500Kg

380V

3kw

25T

25000Pairs/8H





]]>
YE-208E 超高压式中底定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-208E 超高压式中底定型机 Hyperpressure Insole Molding Machine

缸径 Cylinder Diameter200mm

  • 1. 本机适用于女鞋,男鞋中底定型使其贴楦利于结帮。
  • 2. 采用高压油路,适合上下铝模。
  • 3. 新型油路,压力更大,模具上升速度快,工作效率佳。
  • 4. 新型增压油路,彻底解决油温高之现象。
  • 5. 上下模之间距可视需要随意调整,节省行进时间,提高工作效率。
  • 6. 红外线监控保护,确保工作安全。

 

机械尺寸 Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

650X680X1500mm

600kg

380V

3HP

2500Pairs/8H

]]>
YE-208D 超高压式中底定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-208D 超高压式中底定型机 Hyperpressure Insole Molding Machine

缸径 Cylinder Diameter180mm


  • 1. 本机适用于女鞋,男鞋中底定型使其贴楦利于结帮。
  • 2. 采用高压油路,适合上下铝模。
  • 3. 新型油路,压力更大,模具上升速度快,工作效率佳。
  • 4. 新型增压油路,彻底解决油温高之现象。
  • 5. 上下模之间距可视需要随意调整,节省行进时间,提高工作效率。
  • 6. 红外线监控保护,确保工作安全。



 

机械尺寸 Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

650X680X1500mm

600kg

380V

3HP

2500Pairs/8H

]]>
YE-208C 双缸超高压中底定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-208C双缸超高压中底定型机 Two-cylinderHyperpressure Insole Molding Machine

 


  • 1.  本机适用男女鞋中底定型使其贴楦以利结帮。
  • 2.  引进日本高性能油路叶片泵加压、双缸联动,适合各种胶模、铝模的使用。
  • 3.  快速上下压动作,高压力瞬间定型,定型效果特佳。
  • 4.  上下模之间距离可调,节省行程空间。
  • 5.  加装油路冷却系统,使油路更加稳定使用。
  • 6.  左右脚可同时生产,免去换模时间。


 

尺寸 Dimensions

重量 Weight

电压 Voltage

功率 Power

产量 Capacity

650X680X1500mm

700kg

380V

3HP

3000Pairs/8H

 

]]>
YE-208B 超高压式中底定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-208B 超高压式中底定型机 Hyperpressure Insole Molding Machine

 

  • 1.  本机适用于女鞋,男鞋中底定型使其贴楦利于结帮。
  • 2.  采用高压油路,适合上下铝模。
  • 3.  新型油路,压力更大,模具上升速度快,工作效率佳。
  • 4.  新型增压油路,彻底解决油温高之现象。
  • 5.  上下模之间距可视需要随意调整,节省行进时间,提高工作效率。
  • 6.  红外线监控保护,确保工作安全。

 

机械尺寸 Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

650X680X1500mm

600kg

380V

3HP

2500Pairs/8H

]]>
YE-208A 高压式中底定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

YE-208A 高压式中底定型机  High Pressure Insole Molding Machine

 

  • 1.  本机适用于女鞋,男鞋中底定型使其贴楦利于结帮。
  • 2.  采用高压油路,中底定型效果佳。
  • 3.  新型油路,模具上升速度快,工作效率佳。
  • 4.  新型增压油路,彻底解决油温高之现象。
  • 5.  上下模之间距可视需要随意调整,节省行进时间,提高工作效率。
  • 6.  红外线监控保护,确保工作安全。

 

机械尺寸 Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

650X680X1500mm

550kg

380V

2HP

2000Pairs/8H

]]>
E-129 万能磨刀机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

E-129 万能磨刀机  Cutter Grinding Machine

 

l 工作台采用高精密丝杆导轨,专用磨头电机,可调轴向间隙,传动平稳。

l 集中加油装置,实现一次性集中加油。

l 高精度伺服系统,定位准、速度快、精度高。

l 任意调整切削角度和刀盘大小。

l PLC智能控制系统。

 

l High-precision screwrails, special grinding motor, adjustable wheelbase, stable transmission.

l With centralizedrefueling system.

l Precision servosystem.

l Adjustable grindingangle and cutter size.

l PLC control system.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

900x1500x1530mm

400Kg

380V/50-60HZ

1.5kw

--

 

]]>
E-133中底腰位磨边机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

E-133中底腰位磨边机  Insole Quarter GrindingMachine

 

l 特殊设计的磨边金刚砂轮,耐用性更持久,磨边效果更佳。

l 磨边机构结构更合理,调整更简单方便,磨边效率更高。

l 配备除尘接口。

l 适用各类中底腰位磨边。

 

l Specially designeddiamond grinding wheels, better durability and effect.

l Reasonable structure,easy to adjust.

l With dust cleaningconnector .

 

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

1250x1050x1500mm

350Kg

380V/50-60HZ

1.5kw

0.6MPa

1000Pairs/H

]]>
E-213 中底修边机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

E-213 中底修边机 Insole Trimming Machine

 

l 意大利原装刀轮、刀具,更锋利,更耐用,修边效果更佳。

l 自带磨刀系统,无需拆刀即可磨刀,简单快捷。

l 装备符合空气动力学的多通道吸尘系统,杜绝碎屑飞扬。

 

l With Italian originaltools.

l With sharpeningsystem.

l With multi-channeldust cleaning system.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

1200x750x1450mm

250Kg

380V/50-60HZ

1.5kw

5000Pairs/8H

]]>
E-211 中底铲薄机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>



E-211 中底铲薄机 Shankboard Skiving Machine

 

适用于插中纸板铲薄。

简单易用,调整方便,铲薄效果佳。

 

For shankboardskiving.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

850x600x1150mm

300Kg

380V/50-60HZ

2kw

5000Pairs/8H

]]>
E-120 自动双缸中底定型机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

E-120 自动双缸中底定型机 

1.  左右脚同时定型。

2.  三点定位,确保中底放置正确.

3.  先压后顶,确保不移位。

4.  自动收料,节省时间,更安全。

5.  自动左右脚分开堆叠码料。

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

1300x1100x1980mm

2500Kg

380V/50-60HZ

2kw

3000Pairs/8H


]]>
E-123D 液压贴合机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>
E-123D 液压贴合机  Hydraulic Assembling Machine


l 适用于各种插中板贴合。

l 液压系统,带油路散热装置,压力稳定。

l 简单、快捷。

 

l Hydraulic system withoil cooling device.

l Simple and fast.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

680x700x1250mm

280Kg

380V/50-60HZ

1kw

1000Pairs/H

]]>
E-123A 自动贴合机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>
E-123A 自动贴合机  Automatic Assembling Machine


上下插中板自动定位,自动贴合和过压。

PLC智能控制系统。

Automaticpositioning to assembling and rolling.

PLC controlsystem.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

680X700X1250mm

280Kg

380V/50-60HZ

1kw

0.6MPa

7500Pairs/8H


]]>
E-123 全自动贴合机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

E-123 全自动贴合机  Automatic Assembling Machine


  • 1.  集成五大全自动功能,一次贴合成型。
  • 2. 自动送料:自动拾取中底上插中板和下插板。
  • 3. 自动上胶:自动给插中板贴合面上胶。
  • 4.  自动烘干:立体烘箱自动给上胶后的插中板烘干。
  • 5. 自动贴合:上下插中板自动定位,自动贴合。
  • 6.  自动滚压:贴合后的成型中底自动过压。
  • 7.  PLC智能控制系统。

该机已获专利,仿冒必究。

 


机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

1700X2000X2250mm

580Kg

380V/50-60HZ

2kw

0.6MPa

7500Pairs/8H

]]>
E-123B 中底插中钢芯压合机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>

E-123B 中底插中钢芯压合机  Shank Iron Attaching Machine


  • 1. 钢芯插中位置可调。
  • 2. 根据钢芯形状自动压合。
  • 3. 操作简单快捷。

E-125中底插中钢芯上胶机组成一体机器,压合钢芯后自动输送自动上胶。

E-123B andE-125 by connecting became new whole machine, which done attaching, automatictransport to automatic cementing.

 

机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

1000x600x1300mm

200Kg

380V/50-60HZ

1.5kw

1000Pairs/8H

 

]]>
E-125 中底插中钢芯上胶机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>



E-125 中底插中钢芯上胶机  Shank Iron Cementing Machine


  • 1. 特别设计的上胶通道,上胶更顺畅,调整更方便。
  • 2. 定做的毛刷轮,使上胶均匀,节省胶水用量。
  • 3. 与E-123B中底插中钢芯压合机联接组成一体机器。

 

 

E-123B andE-125 by connecting became new whole machine, which done attaching, automatictransport to automatic cementing.


机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

产量Capacity

430x700x730mm

95Kg

380V/50-60HZ

0.37kw

1000Pairs/8H

]]>
E-130A 半自动鸡眼机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>



E-130A 半自动鸡眼机 Semiautomatic Eyeleting Machine

 

  • 1. 打钉位置和间距可调。
  • 2. 打钉速度快,安全高效。
  • 3. 各种规格腰铁均能适用。
  • 4. PLC智能控制系统。



机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

1250X750X1500mm

200Kg

380V/50-60HZ

0.75kw

0.6MPa

7500Pairs/8H



]]>
E-130 自动鸡眼机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>



E-130 自动鸡眼机  Automatic Eyeleting Machine 

 

  • 1. 自动拾取已堆叠在旋转盘上的腰铁和自动吸取插腰板,自动传输至打钉位,自动完成打钉。
  • 2. 打钉位置和间距可调。
  • 3. 打钉速度快,安全高效。
  • 4. 各种规格腰铁均能适用。
  • 5. PLC智能控制系统。



机械尺寸Dimensions

重量Weight

电压Voltage

功率Power

空压源Air Pressure

产量Capacity

1400X1450X1650mm

350Kg

380V/50-60HZ

1kw

0.6MPa

8000Pairs/8H


]]>
YE-128A 自动高解析喷码机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>



YE-128A 自动高解析喷码机  Automatic high-resolution inkjet printer

 

  • 1. 200DPI高清晰喷印,支持Widows的任何字型,喷印任何国家文字。10.1英寸高清晰全视角手触控显示屏,Widows8.1操作系统搭配全触控操作的喷印编辑软件,点选拖拉式的人性化操作。
  • 2. 支持任何内容混合编排:时间、日期、批号、流水号、商标、图形、条形码、二维码、监管码、外挂程序和数据库等等。
  • 3. 喷印方向:正向、逆向、垂直向下、上下倒转、左右翻转。
  • 4. 自动估算每条信息墨水使用量,设有缺墨警示装置。可选配至多8个喷印头,喷印宽度最大可至144毫米。
  • 5. 专业高效的送料和收料系统,能适应不同厚薄大小的材料,并配备计数功能。



机械尺寸Dimensions  

重量Weight

电压Voltage

功率Power

喷印高度 Print height

喷印速度 Print speed

1400X650X1000mm

165kg

220V/50HZ

0.5KW

1-18mm/up to144mm

540mm/s



]]>
YE-128 自动高速喷码机 Sat, 26 Sep 2020 22:46:27 +0800
"右键目标另存为" 下载该机器PDF文档 ]]>


YE-128 自动高速喷码机  Automatic high-speed inkjetprinter


 

  • 1. 200DPI高清晰喷印,内置国标一级二级中文字库(6000多个汉字),自带(宋体、黑体 、繁体、点阵字)四种字库,拼音输入法。
  • 2. 支持日期、时间、批号、班别和可变的流水号,支援各种商标图案,可同时混合编排。
  • 3. 喷印方向:正向、逆向、垂直向下、上下倒转、左右翻转。
  • 4. 设有闪喷功能、独特的供墨系统和墨水设计,保证永不怠机,喷印流畅。
  • 5. 专业高效的送料和收料系统,能适应不同厚薄大小的材料,并配备计数功能。简单易调、人性化设计、傻瓜化操作。

 

  • 1. 200DPI Highresolution printing, installed with National Chinese library, Grade 1 &Grade 2 (over 6000 characters), equipped with 4 fonts library ( SongTi, HeiTi,Chinese Traditional, Dot Matrix font), PinYin Input method.
  • 2. Support fordatetime, lot No., Shift No., Sequence No., variable classes  and images, logos etc., which can mixorchestration.
  • 3. Printingdirection: forward, backward, straight down, upside down, left and right flip.
  • 4. Forced ink jetfunction, Special ink feeding system and exclusive ink, ensure never idlemachine, printing easy and smooth.
  • 5. Professionaland efficient feeding system and receiving system that can adapt to differentsizes , different thickness of material, and with counting function. Simple andeasy to adjust, user-friendly design, fool of operation.

 

机械尺寸Dimensions  

重量Weight

电压Voltage

功率Power

喷印高度 Print height

喷印速度 Print speed

1400X650X1000mm

165kg

220V/50HZ

0.5KW

1-18mm

540mm/s

]]>