专业制鞋机械
高品质高效率

YE-737A油压自动前帮机 Hydraulic Toe Lasting Machine

1.    每双爪子均可配合鞋型，独立调整相对位置及自动平衡功能，并可视鞋面松紧度，选择左右独立自动下拉之行程动作。

2.    九爪独立式可个别调整配合任何形状之鞋头结帮，其自动平衡及扫刀前进时自动下降的原理，更是提高品质增加产量的特征。

3.    扫刀具有寸动及调速功能，使结帮控制的调整作业更为方便。

4.    本机附有十字投影灯装置，方便鞋头校正作业，同时使新手更容易操作。

5.    爪子为快速拆装结构，可于30秒内换装完成。

6.    内撑台上升高度，由外部遥控调整，并提供数字指示参考，使操作更方便。

7.    各机构之压力与速度均可由外部调整，压力表亦配置在机台外部，使机械操作与调整更方便。

8.    最新设计之内外撑台前后调整机构，可针对各鞋型之大小号，快速调整撑台和中爪之相对位置。

9.    第五爪结构于扫刀结帮时爪嘴向内旋转。旋转角度可调整，使前中帮衔接转角处之鞋面能向内拉紧更贴揎，再配合辅助扫刀做结帮动作，使鞋头的结帮品质达到完美境界。

10.  爪盘大小快速调整结构爪盘采用双轨迹结构，左右分开独立位移调整。其旋转原点则不受空间限制，设定于中爪及第二爪之衔接处，故左右爪组于快速调整大小时，和中爪之弧型位置，绝不会改变，可使鞋面于夹紧时更贴楦头，确保结帮质量。

1.    Each set of pincers can beindividually adjusted to their corresponding positions and be functioned withautomatic balancing. Besides, an automatic down pulling stroke can be selectedand controlled according to the tension of uppers.

2.    The 9 independent pincers canbe individually adjusted to cope with the lasting for any shape of shoe toes.The automatic balance device and the theory of automatic descending on wipers'advancing are the very key points for upgrading the quality and raising theproduction capacity.

3.    The wipers are functioned withinching movement arm speed adjustment, which makes the whole adjustment oflasting control more convenient.

4.    The machine is equipped withcross projector, which is convenient for correcting toe lasting and helps newcomers to easily operate.

5.    The rapid installing andreleasing structure for pincers can finish the whole process within 30 seconds.

6.    The height of the last supportplate is remotely controlled. There is a numerical instruction provided forreference which makes the operation easier and more efficient.

7.    The pressure and speed foreach mechanism are adjusted and the pressure gage makes the operation andadjustment more conveniently.

8.    The newly designedforward-and-backward adjusting mechanism for last support plates can quicklyadjust the corresponding position of last support plates and mid pincersaccording to different shoes sizes.

9.    The fifth pincers can rotateinward when the wipers move in and last the shoes. The rotary angle can beadjusted which will help the upper at ball point more stretched and attached tothe last. Then, by the aid of supplemental wipers, the shoes will be lasted andfinished perfectly.

10.  The pincers fixed plate adopts the double-trackingstructure. It is independently adjusted on the right and left. The rotary pointof pincers fixed plate is located at the joint between the first and secondpincers. The curve in between will not be changed when the groups of right andleft pincers are adjusted, which will make the uppers more attached to thelasts.